-
ACI
ACI FS-1A : Freeze Stat, 20' Capillary, Automatic Reset, 1 x SPDT, 2-Year Warranty
MSRP: $267.00$137.88 -
ACI
ACI FS-4A : Freeze Stat, 10' Capillary, Automatic Reset, 2 x SPDT, 2-Year Warranty
MSRP: $324.00$167.32 -
Schneider Electric
Schneider Electric SE7652H5045B : Heat Pump Room Controller, Local Scheduling/Programmable, 3H/2C, PIR ready but PIR cover not included, BACnet MS/TP Communication
MSRP: $687.94$255.25 -
-
Viconics
Viconics R810-621-REV2 : Solid State Relay with Heatsink, Maximum Voltage 600V, Max Amperage 25A, 1-Phase
MSRP: $282.17$110.59 -
-
-
ACI
ACI FS-1 : Freeze Stat, 20' Capillary, Manual Reset, 1 x SPDT, 2-Year Warranty
MSRP: $275.00$142.01 -
ACI
ACI FS-4 : Freeze Stat, 10' Capillary, Manual Reset, 2 x SPDT, 2-Year Warranty
MSRP: $331.00$170.93 -
Schneider Electric
Schneider Electric SE7200C5045 : Zone Controller, 1H/1C Floating or On/Off Digital Control Outputs, PIR Ready but PIR Cover not included, Stand Alone Network Ready
MSRP: $359.13$138.03 -
Schneider Electric
Schneider Electric SER8350A0B11 : Line-Voltage Fan Coil Room Controller: BACnet MS/TP, RH sensor & control, White Case/Fascia
MSRP: $595.83$222.41 -
FreezeStats and Thermostats
A freeze stat is a type of low temperature sensor that is used to detect when the temperature in a given area falls below a certain point, typically the freezing point of water. Duct mounted low-temperature detection sensors with vapor filled copper capillary tube are used to protect water coils from freezing within the air handling equipment. Any section of the capillary tube that is below the set point will cause the vapor to condense to a liquid and trip the SPDT contact. Reset options are manual or automatic and depends on product selection.
Building automation thermostats are specialized thermostats that are used in building automation systems to control the temperature in a building. These thermostats are typically connected to a network of sensors and other devices that monitor and control various aspects of a building's heating, ventilation, and air conditioning (HVAC) system. Building automation thermostats allow users to set and maintain precise temperature levels in different areas of a building, helping to ensure the comfort and safety of occupants while also maximizing energy efficiency. Building automation thermostats can be controlled manually or can be programmed to operate automatically based on a variety of factors, such as the time of day, the weather, and the occupancy of the building.