ACI A/20K-BP-6'CL2P : 1" Bullet Probe Temperature Sensor, 20K Thermistor, 6 ft (1.83m), 2 Conductor Plenum Rated Cable
Applications:
- Roof Top Units
- Air Handlers
- Discharge Air/Supply/Return/Mixed Air Duct Temperature
- Remote Temperature Sensing
The ACI Thermistor Bullet Probe Series features a one inch stainless steel probe with two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. The bullet style sensor is designed to monitor air temperatures and should not be fully submerged in water. This series can be ordered with different wire options and NIST certificates.
- Sensor Type: Thermistor
- Sensor Curve: Non-Linear, NTC (Negative Temperature Coefficient)
-
Number Sensing Points: Number Wires: One
-
Sensor Output @ 25oC (77oF) | (Lead Wire Colors):
-
A/AN (Type III): 10KΩ nominal | (White/White)
-
A/CP (Type II): 10KΩ nominal | (White/Green)
-
A/20K: 20KΩ nominal | (Brown/Blue)
-
-
Stability: Sensor Dependent; Contact ACI for more information on the sensor in question.
-
Response Time (63% Step Change): 10 Seconds nominal
-
Power Dissipation Constant: 3 mW/°C
-
Probe Material: 304 Stainless Steel
-
Operating Temperature Range: -40 to 150°C (-40 to 302°F)
-
Storage Temperature Range: -40 to 85°C (-40 to 185°F)
-
Operating Humidity Range: 10 to 95% RH, non-condensing
-
Lead Length | Conductor Size: 24” (61cm) | 22 AWG (0.65mm)
-
Lead Wire Insulation Wire Rating: Etched Teflon Colored Leads | MIL-W-16878/4 (Type E)
-
Conductor Material: Silver Plated Copper
-
Product Dimensions (Length x Diameter): 1.00” (25.4mm) x 0.250” (6.35 mm)
-
Product Weight: 0.02 lbs. (9.07g)
-
Agency Approvals: CE, RoHS2, WEEE
- Sensor Type:
- Bullet Probe
- Temperature Element:
- 20K
- Lead Length:
- 6 ft Plenum Rated Cable
