Belimo LF120 US : Fail-Safe Damper Actuator, 35 in-lb Torque, 120VAC, On/Off Control Signal, 5-Year Warranty
The Belimo Fail-Safe actuator LF120 is designed for controlling dampers in typical commercial HVAC applications. Operating at a nominal voltage of AC 120V with a torque motor of 35 in-lb [4 Nm], this actuator offers On/Off control functionality. The Belimo LF120 operates with a reversible torque motor that enables fail-safe operation by providing spring return functionality. The damper actuator has a direction of motion switch for clockwise or counterclockwise rotation, It offers an angle of rotation of up to 95° and has a running time of 75 seconds for a 90° rotation. The LF120 enclosure rating of IP54 and NEMA 2.
Specifications
| Voltage AC/DC | AC 100...240 V |
| Power Consumption (Running) | 5.5 W |
| Power Consumption (Holding) | 3.5 W |
| Power Consumption For Wire Sizing | 7.5 VA |
| Torque | 35 in-lb [4 Nm] |
| Control Type | On/Off |
| Direction Of Motion Motor | selectable with switch 0/1 |
| Direction of Rotation (Fail-Safe) | Reversible with cw/ccw mounting |
| Angle of Rotation | 95 |
| Running Time (Motor) | 75 s |
| Running Time (Fail-safe) | <25 s |
| Protection category | IP42 |
| Degree Of Protection NEMA | NEMA 2 |
| Enclosure Type | UL Enclosure Type 2 |
| Ambient Temperature | -22...122°F [-30...50°C] |
Datasheets
 | Belimo LF120 Technical Data sheet |
| Belimo LF Series Installation Instructions |
| Belimo Mounting Methods Guide |
| Belimo Master Format |
- Actuator Type:
- Fail-Safe
- Torque:
- 35 in-lb
- Voltage:
- 120VAC
- Control Signal:
- On/Off
- Auxillary Switch:
- None
- NEMA 4X Enclosure:
- No
