Schneider Electric SE7200C5045 : Zone Controller, 1H/1C Floating or On/Off Digital Control Outputs, PIR Ready but PIR Cover not included, Stand Alone Network Ready
Smart energy management has never been easier than with the SE7200 series. Designed for new construction or retrofit projects, the controllers dramatically decrease total costs by reducing installation time, configuration and commissioning time. The SE7200 series provides the advanced features and monitoring functions required by modern building automation systems without the use of software and commissioning tools.
Specifications
Power Requirements | 19-30Vac, 50/60 Hz; 2 VA (RC & C) Class 2 |
Temperature Operating Conditions | 0 °C - 50 °C ( 32 °F - 122 °F ) |
Humidity Operating Conditions | 0% - 95% R.H. non-condensing |
Temperature Sensor | Local 10 K NTC thermistor |
Room and Outdoor Air Temperature Display Range | -40 °C - 50 °C ( -40 °F - 122 °F ) |
Binary Inputs | Dry contact across terminal BI1, BI2 & UI3 to Scom |
Contact Output Rating | Triac output: 30 Vac, 1 Amp. Maximum, 3 Amp. in-rush Analog: 0 to 10 Vdc into 2KΩ resistance min. |
Wire Gauge | 18 gauge maximum, 22 gauge recommended |
Datasheets
Schneider Electric SE7200C5045 Data Sheet | |
Schneider Electric SE7200 Series Installation Guide | |
Schneider Electric SE7000 Series Application guide |
- Application:
- Zone Control
- Sub-Category:
- SE7200 Series
- Occupancy:
- None
- Communication:
- Standalone