The Senva P5-2500-1XP is part of the Senva P5 Series Universal Dry Pressure Transmitter family - the multi-configuration unit in Senva's dry-pressure lineup. One SKU replaces multiple fixed-range transmitters in your stock: this unit's 0-25 in WC base scales to four selectable sub-ranges (settable via internal slide switch), with field-selectable output signal (4-20 mA 2-wire loop, 4-20 mA 3-wire, 0-5 VDC, or 0-10 VDC) and field-selectable direction (unidirectional or bidirectional). Built around a MEMS silicon piezoresistive sensor with non-position-sensitive design, manual or contact-closure auto-zero, and a patented enclosure with high-density DIN-rail mount and 3/8 in conduit-ready entry. This SKU ships with the integrated duct probe with gasketed dampening tip for in-duct installation.
WARRANTY
Key Features
Universal Output + Sub-Range
Four field-selectable output signals (4-20 mA 2-wire loop, 4-20 mA 3-wire, 0-5 VDC, 0-10 VDC) on a single internal switch. Four selectable sub-ranges on another switch. Field-selectable unidirectional or bidirectional via a third switch. One stocking SKU covers what would otherwise be 16+ fixed-range parts.
MEMS Silicon Piezoresistive Sensing
Solid-state silicon sensing element with precision factory calibration. Non-position-sensitive design - mount flat, vertical, or DIN-rail without zero shift. Thermal drift is 0.02% FSO per deg C (0.01% per deg F) referenced to 72 F. Accuracy is +/-1.00% of selected range typical.
0-25 in WC Base + Four Sub-Ranges
Base full-scale: 0-25 in WC. Selectable sub-ranges in unidirectional mode: 5.0, 10, 15, 25 in WC. Selectable bidirectional sub-ranges: +/-5.0, +/-10, +/-15, +/-25 in WC. Set via slide switches inside the enclosure - power off before changing.
Manual + Contact-Closure Auto-Zero
Front-panel pushbutton zero plus a separate remote-zero terminal that accepts a normally-open contact closure - useful for programmatic re-zeroing from the BAS. Press and hold ZERO SET for 2 seconds with no pressure applied (or with H and L ports tied together) to re-zero. Zero drift <0.004 in WC per year.
Patented DIN-Rail + Conduit-Ready Mount
Patented enclosure design with two DIN-rail orientations - back-mount for standard depth or side-mount for high-density panels. Integrated 3/8 in flex conduit cover with 3/4 in knockout means no separate fittings needed for typical commercial install.
Integrated Duct Probe with Dampening Tip
Ships with the gasketed duct probe that includes an integrated dampening tip for stable readings in turbulent ductwork. The probe threads directly into the back of the enclosure for direct in-duct mounting, or can be remoted with the optional RP-6 6-inch remote probe.
Selectable Sub-Ranges & Outputs
This SKU is the 0-25 in WC base unit. All field-selectable options are set with slide switches inside the enclosure. Power must be off when changing switches.
| Selectable Option | Available Settings |
|---|---|
| Base Full-Scale Range | 0-25 in WC |
| Unidirectional Sub-Ranges (4) | 5.0 in WC, 10 in WC, 15 in WC, 25 in WC |
| Bidirectional Sub-Ranges (4) | +/-5.0 in WC, +/-10 in WC, +/-15 in WC, +/-25 in WC |
| Selection Method | Internal slide switch (Pressure Range Selector) |
| Direction Selection | Internal slide switch (Uni/Bi-Directional Selector) |
| Output Selection | Internal slide switch (Output Type Selector): 4-20 mA 2-wire / 4-20 mA 3-wire / 0-5 VDC / 0-10 VDC |
Technical Specifications
| Specification | Value |
|---|---|
| Model | P5-2500-1XP |
| Series | P5 Universal Dry Pressure |
| Base Pressure Range | 0-25 in WC |
| Selectable Sub-Ranges (Uni) | 5.0 in WC, 10 in WC, 15 in WC, 25 in WC |
| Selectable Sub-Ranges (Bi) | +/-5.0 in WC, +/-10 in WC, +/-15 in WC, +/-25 in WC |
| Direction | Field-selectable (Uni or Bi) via internal switch |
| Output Signals | Field-selectable: 4-20 mA 2-wire loop / 4-20 mA 3-wire / 0-5 VDC / 0-10 VDC |
| Supply Voltage | 12-30 VDC or 24 VAC (+/-10%), 30 mA max |
| Accuracy | +/-1.00% of selected range (combined non-linearity, hysteresis, and repeatability at 70 F) |
| Sensor Type | MEMS silicon piezoresistive, precision calibrated |
| Zero Function | Pushbutton + N.O. contact-closure auto-zero |
| Zero Tolerance | Included in accuracy specification |
| Span Tolerance | +/-1.00% (+/-1% +/-0.005 in WC for ranges under 0.10 in WC) |
| Zero Drift (1 year) | 0.004 in WC/year max (0.4% for units over 0.5 in WC) |
| Thermal Shift | 0.02% FSO per deg C (0.01% FSO per deg F), measured from 22 C (72 F) |
| Response Rate | 8 seconds (full scale) |
| Overpressure | 332 in WC |
| Max Static Line Pressure | 332 in WC |
| Burst Pressure | 415 in WC |
| Position Sensitivity | Non-position sensitive |
| Operating Temperature | -4 to 140 F (-20 to 60 C) |
| Compensated Temperature | -4 to 140 F (-20 to 60 C) |
| Operating Humidity | 0 to 95% RH, non-condensing |
| Media Compatibility | Dry, oil-free air or nitrogen (N2) |
| Display | None (LED status only) |
| Duct Probe | Integrated gasketed probe with dampening tip |
| Enclosure Material | UL94-5VB rated, ABS |
| Enclosure Rating | NEMA 1 |
| Conduit Entry | 3/8 in flex conduit cover with 3/4 in knockout (integrated) |
| Tubing Connection | Hose barbs, accepts 1/8 in and 1/4 in ID tubing |
| DIN Rail Mounting | Back or side (two orientations) - patented design |
| Terminal Torque | 3.5 in-lb |
| Dimensions | 4.75 x 1.82 x 0.90 in (transmitter); 5.16 x 1.82 x 0.90 in with display variant |
| Weight | 0.22 lb |
| Compliance | CE, RoHS |
| Procurement Compliance | Buy American Act (BAA), BABAA, TAA, ARRA Section 1605 |
| Country of Origin | Made in USA - Beaverton, Oregon (over 65% domestic component cost) |
| Warranty | 7-year limited (electronics) |
| Manufacturer Part Number | P5-2500-1XP |
Documentation
Frequently Asked Questions
What sub-ranges and outputs does the P5-2500-1XP support?
How is the P5 different from the P4 Series?
How do I wire the output signal?
Does this SKU have a display?
What does the included duct probe do?
How do I zero the transmitter and what media is it rated for?
- Brand:
- Senva
- Series:
- P5 Universal Dry Pressure
- Product Type:
- Universal Dry Media Differential Pressure Transmitter
- Base Range:
- 0-25 in WC
- Range Code:
- 2500
- Selectable Sub-Ranges (Uni):
- 5.0 in WC, 10 in WC, 15 in WC, 25 in WC
- Selectable Sub-Ranges (Bi):
- +/-5.0 in WC, +/-10 in WC, +/-15 in WC, +/-25 in WC
- Number of Selectable Sub-Ranges:
- 8 (4 uni + 4 bi)
- Direction:
- Field-selectable Unidirectional or Bidirectional
- Output Signal:
- Field-selectable: 4-20 mA 2-wire loop / 4-20 mA 3-wire / 0-5 VDC / 0-10 VDC
- Supply Voltage:
- 12-30 VDC or 24 VAC, 30 mA max
- Accuracy:
- +/-1.00% of selected range
- Display:
- None (LED status only)
- Duct Probe:
- Integrated gasketed probe with dampening tip
- Sensor Type:
- MEMS silicon piezoresistive
- Zero Function:
- Pushbutton + N.O. contact-closure remote zero
- Zero Drift:
- 0.004 in WC/year max
- Thermal Shift:
- 0.02% FSO/C (0.01% FSO/F)
- Response Rate:
- 8 seconds full-scale
- Overpressure:
- 332 in WC
- Max Static Line Pressure:
- 332 in WC
- Burst Pressure:
- 415 in WC
- Position Sensitivity:
- Non-position sensitive
- Operating Temperature:
- -4 to 140 F, -20 to 60 C
- Operating Humidity:
- 0 to 95% RH non-condensing
- Media:
- Dry oil-free air, nitrogen (N2)
- Enclosure:
- UL94-5VB ABS, NEMA 1
- Tubing Accepted:
- 1/8 in and 1/4 in ID
- Conduit Entry:
- 3/8 in flex (integrated cover with 3/4 in knockout)
- DIN Rail Mounting:
- Back or side (patented design)
- Terminal Torque:
- 3.5 in-lb
- Compliance:
- CE, RoHS
- Procurement:
- Buy American Act (BAA), BABAA, TAA, ARRA Compliant
- Country of Origin:
- USA (Beaverton, Oregon)
- Warranty:
- 7-year limited
