Viconics VT7652H5531B : Heat Pump Room Controller, Local Scheduling/Programmable, 3H/2C, Factory assembled with PIR cover, BACnet MS/TP Communication

Viconics VT7652H5531B : Heat Pump Room Controller, Local Scheduling/Programmable, 3H/2C, Factory assembled with PIR cover, BACnet MS/TP Communication

The VT7600 PI thermostat family is specifically designed for single stage and multi-stage control of heating/cooling equipment such as rooftop and self- contained units. The product features an intuitive, menu-driven, back-lit LCD display, which walks users through the programming steps, making the process extremely simple. Accurate temperature control is achieved due to the product’s PI time proportional control algorithm, which virtually eliminates temperature offset associated with traditional, differential-based thermostats.

All models contain two digital inputs, which can be set by the user to monitor filter status, activate a remote temporary occupancy switch, and/or used as a general purpose service indicator. In addition, depending on the model, up to three remote sensor inputs are available. All models contain a SPST auxiliary switch, which can be used to control lighting or disable the economizer function and a discharge air sensor input. For more advanced applications, an economizer control logic has been integrated onto the thermostat for use with proportional damper economizer actuators.

Product Highlights

• 2 digital inputs
• Smart fan operation
• Unique configuration key with password
• Lockable keypad
• 6 hour reservable time for clock
• Remote room and outdoor temperature sensor
• Auxiliary output
• Discharge air sensor
• Intuitive menu-driven programming Options and accessories
• Intuitive menu-driven programming
• Economizer output 0-10 Vdc
• 3Heat/2Cool for heat pump models

Specifications

Power Requirements	19-30Vac, 50/60 Hz; 2 VA (RC & C) Class 2 RC to RH jumper 2.0 Amps 48 VA maximum
Temperature Sensor	Local 10 K NTC thermistor
Digital Inputs	Relay dry contact only across C terminal to DI1 or DI2
Contact Output Rating	Each relay output: ( Y1, Y2, G, W1, W2 & AU ) 30 Vac, 1 Amp. maximum 30 Vac, 3 Amp. in-rush
Economizer Analog Output Rating	0 to 10 Vdc into 2KΩ resistance min.
Wire Gauge	18 gauge maximum, 22 gauge recommended

 

Datasheets

	Viconics VT7600 Series Data Sheet
	Viconics VT7600 Series Installation