ACI A/100-2W-SBS : Stainless Steel Flush Mount Button Temperature Sensor, 100 Ohm Platinum RTD (Two Wires), 24"Etched Teflon Leads, Made in USA, 5-Year Warranty
The ACI Platinum Flush Mount Button Series features a stainless steel, brass or white plastic button sensor with Etched Teflon colored lead wires to differentiate the different sensor types. The three-wire “-3W” option should be ordered when using a 3-Wire temperature transmitter or sensor configuration on your building management system or PLC (Programmable Logic Controller). The purpose of the 3rd wire is to compensate for external lead wire resistance that will affect your sensor output. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. Sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture on the sensor and to increase response time using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design and should be used in applications where aesthetics is one of your primary concerns. Each unit is supplied with a mounting kit to aid in the installation process so that they can be easily hidden or blended into the environment or space. Note that if painting the sensors, be sure to coat with as little paint as possible, to limit the effect on accuracy and responsiveness of the sensor.
Specifications:
Sensor Type | Sensor Curve: | Platinum RTD | PTC (Positive Temperature Coefficient) |
Number Sensing Points: | One |
Number Wires: | Two (Non-Polarity Sensitive) |
Sensor Output @ 0ºC (32ºF): | 100 Ohms Nominal |
Enclosure Material: |
|
Lead Length | Conductor Size: | 24” (61cm) | 22 AWG (0.65mm) |
Lead Wire Insulation | Wire Rating: | Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E) |
Datasheets
ACI Platinum RTD Flush Mount Buttons Data Sheet | |
ACI Platinum RTD Flush Mount Buttons Installation Sheet |
- Sensor Type:
- Flush Mount Button
- Temperature Element:
- 100 Ohm Platinum RTD
- Supported Protocols:
- None
- Humidity Element:
- None
- CO2 Element:
- None
- Setpoint:
- No Setpoint
- Override:
- No Override
- Display:
- No Display
- Material:
- Brass