ACI A/AN-BP-10'CL2P : 1" Bullet Probe Temperature Sensor, 10K Type III Thermistor, 10 ft (3.05m) Plenum Cable, Made in USA, 5-Year Warranty
The ACI Thermistor Bullet Probe Series is engineered for precise air temperature monitoring. Featuring a 1-inch stainless steel probe and 10 foot Plenum Leads, this sensor allows easy identification of NTC sensor types. ACI's double encapsulation process safeguards against moisture, while the thermally conductive epoxy enhances response times, ensuring accurate readings. Designed for air applications, the bullet probe is not suitable for full water submersion.
Applications:
- Rooftop Units (RTUs)
- Air Handlers
- Discharge Air, Supply Air, Return Air, and Mixed Air Duct Temperature Monitoring
- Remote Temperature Sensing
Specifications:
| Sensor Type: | Thermistor |
| Sensor Curve: | Non-Linear, NTC (Negative Temperature Coefficient) |
| Number Sensing Points: | One |
| Number Wires: | Two (Non-Polarity Sensitive) |
| Sensor Output @ 25 °C (77 °F) | A/AN (Type III): 10 kΩ nominal |
| (Standard Lead Wire Colors) | (White/White) |
| Probe Material: | 304 Stainless Steel |
| Product Dimensions (Length x Diameter): | 25.4 mm x 6.35 mm (1 in x 0.25 in) |
| Agency Approvals: | CE, UKCA, RoHS2, WEEE |
Datasheets
 |
ACI Bullet Probe Thermistor Data Sheet |
|
ACI Bullet Probe Installation Instructions |
- Sensor Type:
- Probe Only
- Probe Length:
- 1 Inch
- Temperature Element:
- 10K Type III
- Lead Length:
- 10 Foot Plenum Rated Cable
- Enclosure:
- No Box
