Skip to main content

ACI A/AN-FA-12'-GD : Flexible Cable Averaging Temperature Sensor, 10K Type III Thermistor, 12' Probe, Galvanized Enclosure

ACI

MSRP: $249.00
$89.64
(You save $159.36 )
(No reviews yet) Write a Review
SKU:
A/AN-FA-12'-GD
Condition:
New
Availability:
Ships in 3-5 Days
Adding to cart… The item has been added

ACI A/AN-FA-12'-GD : Flexible Cable Averaging Temperature Sensor, 10K Type III Thermistor, 12' Probe, Galvanized Enclosure

Applications:

  • Air Handlers
  • Roof Top Units
  • Mixed Air / Discharge /Supply Air Temperature Monitoring
  • Data Centers
  • Hospitals

The ACI Thermistor Flexible Averaging Series features an 18 AWG Plenum Rated cable sensing element with two, 12 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are multi-point. Averaging sensors provide a better overall average temperature of the actual air inside larger ducts when compared to that of a single point sensor. All flexible averaging sensors are limited to being used in applications where operating temperatures are limited and high humidity, chemical resistance, and UV light sources aren’t required. Each of the sensing elements is protected using a dual wall adhesive lined heat shrink tubing to provide a basic level of moisture protection. The sensor length should be determined by the size of your duct.

Specifications

Sensor Type | Sensor Curve: Thermistor | Non-Linear, NTC (Negative Temperature Coefficient)
Sensor Series Output @ 25°C (77°F ) (Lead Wire Colors):
A/AN (Type III): 10KΩ nominal | (White/White)
Accuracy 0-70°C (32-158°F): +/-0.20°C (+/-0.36°F)
Response Time (63% Step Change) 15 Seconds nominal
Enclosure Specifications: “-GD” Enclosure: Galvanized Steel, -40 to 115oC (-40 to 239oF), NEMA 1 (IP10)
Storage Temperature Range 0 to 75°C (32 to 167°F) | -20 to 75°C (-4 to 167°F)
Sensor Operation Temperature Range: 0 to 75°C (32 to 167°F) | -20 to 75°C (-4 to 167°F)
Operating Humidity Range: 10 to 95% RH, non-condensing
Sensor Material: Low Smoke PVC | CL2P | CMP Plenum Rated Cable
Sensor Diameter: 0.170” (4.32mm) nominal
Lead Length | Conductor Size: 12” (30.5cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Ratings: Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material: Silver Plated Copper
Agency Approvals: RoHS2, WEEE

 

Datasheets

pdf logo Flexible Averaging Multipoint Temperature Sensor Data Sheet
pdf logo ACI Averaging Installation & Operation Instructions
Sensor Type:
Averaging
Averaging Type:
Flexible Cable
Temperature Element:
10K Type III
Probe Length:
12 Foot
Enclosure:
Galvanized Steel Enclosure