ACI A/AN-SP-OR : Wall Plate Temperature Sensor, Stainless Steel, 10K Type III Thermistor, Override
The ACI Thermistor Wall Plate Series features a decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum wall plate with two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall, since they are designed to be mounted over a standard single gang junction box or directly over a hole in the wall with the use of drywall anchors to monitor ambient air temperatures in a space. Tamper Proof mounting screws are available upon request.
Specifications:
| Sensor Type | Sensor Curve: | Thermistor | Non-Linear, NTC (Negative Temperature Coefficient) |
| Number Sensing Points: | One |
| Number Wires: | Two (Non-Polarity Sensitive) |
| Sensor Output @ 25ºC (77ºF): |
|
| Override: | Short Thermistor (Default); Field (Jumper) Selectable “Dry Contact” Closure (Separate Input) |
| Enclosure Material: | 430 Stainless Steel (Brushed Stainless Steel Finish) |
Datasheets
 | ACI Thermistors Wall Plate Data Sheet |
| ACI Thermistors Wall Plate Installation Sheet |
- Sensor Type:
- Wall Plate
- Temperature Element:
- 10K Type III
- Supported Protocols:
- None
- Humidity Element:
- None
- CO2 Element:
- None
- Setpoint:
- No Setpoint
- Override:
- Override
- Display:
- No Display
- Material:
- Stainless Steel
