ACI A/CP-PO-18" : 18" Probe Temperature Sensor, 10K Type II Thermistor, 14" Etched Teflon Leads, Made in USA, 5-Year Warranty
The ACI Thermistor Probe Only Series includes a ¼” diameter stainless steel probe with two Etched Teflon-colored lead wires, distinguishing different NTC sensor types. Each sensor in this series is manufactured with ACI's reliable double encapsulation method, protecting against moisture and enhancing thermal response with high-quality, thermally conductive epoxy. The probe is intended for use in duct and immersion applications when paired with the appropriate thermowell length.
Applications:
- Roof Top Units
- Air Handlers
- Supply/Discharge Air
- Return/Mixed/Exhaust Air Duct Temperature Sensing
- Immersion Temperature Sensors
- Replacement Temperature Sensors
Specifications
| Sensor Type: | Thermistor |
| Sensor Curve: | Non-Linear NTC (Negative Temperature Coefficient) |
| Number Sensing Points: | One |
| Number Wires: | Two (Non-Polarity Sensitive) |
| Sensor Output @ 25 °C (77 °F): | A/CP (Type II): 10KΩ nominal |
| (Lead Wire Colors) | (White/Green) |
| Response Time (63% Step Change): | 10 Seconds nominal |
| Probe Material: | 304 Stainless Steel |
| Product Dimensions | Probe : | 0.250" (6.35mm) |
| Agency Approvals: | CE, RoHS2, WEEE |
Datasheets
 |
ACI Stainless Steel Probe Only Thermistor Data Sheet |
|
ACI Probe Installation Instructions |
- Sensor Type:
- Probe Only
- Probe Length:
- 18 Inch
- Temperature Element:
- 10K Type II
- Lead Length:
- 14 Inch Etched Teflon Leads
- Enclosure:
- No Box
