ACI A/CP-RA-18"-GD : Rigid Probe Averaging Temperature Sensor, 10K Type II Thermistor, 18" Probe, Galvanized Enclosure
Applications:
- Air Handlers
- Roof Top Units
- Mixed Air / Discharge /Supply Air Temperature Monitoring
- Data Centers
- Hospitals
The ACI Thermistor Rigid Averaging Series boasts a 1⁄4” Diameter stainless steel sensing element, equipped with two 12-inch 22 AWG Etched Teflon colored lead wires for easy sensor type differentiation. Featuring 4 sensing points in lengths ranging from 12” to 48”, these sensors offer superior average temperature measurement within ducts compared to single point sensors. Hermetically sealed to prevent moisture intrusion, each sensor includes an integrated foam pad for effective duct sealing and vibration dampening upon installation. Mountable like standard single point duct sensors, the rigid averaging sensor stands out with three additional sensing points for enhanced control.
Specifications
| Sensor Type | Sensor Curve: | Thermistor | Non-Linear, NTC (Negative Temperature Coefficient) |
| Sensor Series Output @ 25°C (77°F ) (Lead Wire Colors): | A/CP (Type II): 10KΩ nominal | (White/Green) |
| Accuracy 0-70°C (32-158°F): | +/-0.20°C (+/-0.36°F) |
| Response Time (63% Step Change) | 10 Seconds nominal |
| Enclosure Specifications: | “-GD” Enclosure: Galvanized Steel, -40 to 115oC (-40 to 239oF), NEMA 1 (IP10) |
| Storage Temperature Range | -40 to 85°C (-40 to 185°F) |
| Operating Humidity Range: | 10 to 95% RH, non-condensing |
| Probe Material: | 304 Stainless Steel |
| Probe Diameter: | 0.250” (6.35mm) |
| Fitting Material | Flammability Rating: | Polyamide 66 (High Performance Nylon) | UL94-HB |
| Foam Pad Material/Flammability Ratings | Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C |
| Lead Length | Conductor Size: | 12” (30.5 cm) | 26 AWG (0.40 mm) |
| Lead Wire Insulation | Wire Ratings: | Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E) |
| Conductor Material: | Silver Plated Copper |
| Agency Approvals: | RoHS2, WEEE |
Datasheets
 | Rigid Averaging Temperature Sensor Data Sheet |
| ACI Rigid Averaging Installation & Operation Instructions |
- Sensor Type:
- Averaging
- Averaging Type:
- Rigid Probe
- Temperature Element:
- 10K Type II
- Probe Length:
- 18 Inch
- Enclosure:
- Galvanized Steel Enclosure
