ACI A/RH1-100-2W-D : Duct Relative Humidity Sensor, 1% Accuracy, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), 100 Ohm Platinum RTD (Two Wires), Plastic Duct Enclosure (Euro), Made in USA
The ACI Relative Humidity with Platinum RTD Duct Series utilizes a thermoset polymer capacitive sensing element with a factory fitted hydrophobic filter to improve its moisture resistance. The sensing elements multilayer construction also provides excellent resistance in applications where dust, dirt, oils and common environmental chemicals are found. The RH duct sensors include on board DIP switches which allow the user to select the desired output signal and can be powered by AC or DC power sources. Each unit also contains 0%, 50%, and 100% test options to verify that the transmitter is both working and wired properly. Field calibration can be performed by using the increment and decrement calibration DIP switches without the need to replace the sensing element. These enhancements provide increased flexibility and outstanding long-term reliability without the need to replace the sensors in the field.
Applications:
- Monitor Outdoor Air Humidity
- Economizer Control
- Psychrometric calculations such as Enthalpy and Dew point
- Wash down Applications
Datasheets
 | ACI Relative Humidity Duct Platinum RTD Data Sheet |
| ACI Relative Humidity Duct Platinum RTD Installation Sheet |
- Sensor Type:
- Duct
- Humidity Element:
- 1%
- Output Signal:
- 4-20mA, 0-5 VDC, or 0-10 VDC
- Temperature Element:
- 100 Ohm Platinum RTD
- CO2 Element:
- None
- Display:
- No Display
- VOC Element:
- None
- Probe Length:
- 8
- Enclosure:
- Plastic Box Enclosure
- Supported Protocols:
- None
