ACI A/RH1-100-2W-R : Room Relative Humidity Sensor, 1% Accuracy, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), 100 Ohm Platinum RTD (Two Wires), Room (R) Infinity Enclosure (Beige), Made in USA
The ACI Relative Humidity with Platinum RTD Room Series utilizes a thermoset polymer capacitive sensing element with a factory fitted hydrophobic filter to improve its moisture resistance. The sensing elements multilayer construction also provides excellent resistance in applications where dust, dirt, oils and common environmental chemicals are found. The RH room sensors include on board DIP switches which allow the user to select the desired output signal and can be powered by AC or DC power sources. Single point field calibration can be performed by using the increment and decrement calibration DIP switches to adjust your curve up or down in +/- 0.5% increments with each toggle of the corresponding switches. These enhancements provide increased flexibility and outstanding long-term reliability without the need to replace the sensors in the field.
Applications:
- Humidification
- Dehumidification
- Monitoring Indoor Space Humidity
- Clean Rooms
- Hospitals
- Process Control
- Laboratories
- Museums
- Schools
- Office Buildings
- Data Centers
- ESD (Anti-Static) Control
Datasheets
 | ACI Relative Humidity Room Platinum RTD Data Sheet |
| ACI Relative Humidity Room Platinum RTD Installation Sheet |
- Sensor Type:
- Wall Mount
- Humidity Element:
- 1%
- Humidity Ouput:
- 4-20 mA, 0-5 VDC, or 0-10 VDC
- Temperature Element:
- 100 Ohm Platinum RTD
- CO2 Element:
- None
- Display:
- No Display
- Supported Protocols:
- None
- Setpoint:
- No Setpoint
- Override:
- No Override
- Material:
- Plastic
