ACI A/RH3-1K-NI-O-BB : Outside Air Relative Humidity Sensor, 3% Accuracy, RH Outputs: 0-5, 0-10 VDC & 4-20mA (Default), 1K Nickel RTD, NEMA 3R Outdoor Enclosure, Made in USA
The ACI Relative Humidity with Nickel RTD Outside Air Series utilizes a thermoset polymer capacitive sensing element with factory applied hygroscopic filter to deliver a proportional analog current or voltage output signal. The hygroscopic filter provides added resistance to moisture, dust, and other chemicals for greater long term reliability. The RH Outside Air transmitter features integral DIP switches for field selection of the proper output signal and supply voltage to meet your applications requirements. Each unit also contains 0%, 50%, and 100% test options to verify that the transmitter is both working and wired properly. Field calibration also can be performed by using the increment and decrement calibration DIP switches without the need to replace the sensing element. These enhancements provide increased flexibility and outstanding long-term reliability.
Applications:
- Monitor Outdoor Air Humidity
- Economizer Control
- Psychrometric calculations such as Enthalpy and Dew point
- Wash down Application
Datasheets
 | ACI Relative Humidity Outside Air Nickel RTD Data Sheet |
| ACI Relative Humidity Outside Air Nickel RTD Installation Sheet |
- Sensor Type:
- Outside Air
- Humidity Element:
- 2%
- Humidity Ouput:
- 4-20 mA, 0-5 VDC, or 0-10 VDC
- Temperature Element:
- 1K Nickel RTD
- CO2 Element:
- None
- Display:
- No Display
- Enclosure:
- Aluminum NEMA 3R Enclosure
