Part Number
BA/HQF-E-C-1-X60-X
Humidity Output
0-10 VDC
Temp Sensor
20K Thermistor
Display
Fahrenheit Display
Mounting
Standard J-Box
Warranty
5 Years
The BA/HQF-E-C-1-X60-X is a BAPI-Stat Quantum combination room temperature and humidity sensor with a 20K Thermistor temperature element and 0-10 VDC humidity output. The unit is equipped with a high-contrast LCD displaying temperature in °F and humidity in %RH. An on-unit slider provides occupant setpoint adjustment with a No Setpoint display range and 0-10KΩ output to the controller. The capacitive polymer humidity element is factory-calibrated to ±2% RH at 25°C across the 20 to 80% RH range.
Best For
Occupied conference rooms, offices, and tenant spaces where occupants need to fine-tune comfort within BAS-defined limits, with full temperature and humidity feedback to the controller.
5-YEAR WARRANTY
Backed by BAPI's 5-Year Warranty. Factory-calibrated and tested to BAPI's quality standards before shipment.
Key Features
High-Contrast LCD
Upgraded display improves clarity at greater viewing distances, showing temperature, humidity, and occupancy status.
Capacitive Polymer Humidity Element
Long-term stable capacitive polymer sensor ±2% RH at 25°C across the 20 to 80% RH range, factory calibrated.
20K Thermistor Temp Sensor
Passive 20K Thermistor temperature element compatible with most BAS controller inputs.
Slider Setpoint Adjustment
Front-panel slider for occupant setpoint adjustment with No Setpoint display range and 0-10KΩ output to controller.
Field Calibration
±5% RH field calibration adjustment in 0.1% increments via potentiometer (units without display) or programming pages (units with display).
Modern Quantum Enclosure
Clean modern ABS enclosure (UL94 V-0) mounts to standard 2"x4" junction box, European junction box, or directly to drywall (screws included).
Technical Specifications
| Part Number | BA/HQF-E-C-1-X60-X |
| Sensor Type | Room Temperature + Humidity |
| Humidity Sensor | Capacitive Polymer, ±2% RH @ 25°C, 20 to 80% RH |
| Humidity Output | 0 to 10 VDC Output |
| Temperature Sensor | 20K Thermistor |
| Temp Accuracy | ±0.36°F Thermistor, ±0.5°F RTD (typical) |
| Display | °F |
| Setpoint Adjustment | Slider Setpoint Adjustment |
| Setpoint Display Range | No Setpoint Adjustment |
| Setpoint Output Range | 0 to 10KΩ |
| Occupant Override | No Occupant Override |
| Power | 15 to 35 VDC or 15 to 28 VAC |
| Power Consumption | 20 mA max (4-20 mA), 4 mA max (0-5/0-10 VDC), 0.1 VA max (AC) |
| Field Calibration | ±5% RH in 0.1% increments (factory calibrated) |
| Wiring | 2 to 5 pair, 16 to 22 AWG |
| Mounting | Standard 2"x4" J-Box Mount |
| Operating Range | 32 to 122°F (0 to 50°C), 0 to 95% RH non-condensing |
| Enclosure | ABS Plastic, UL 94 V-0 |
| Agency | CE EN 61326-1:2013 EMC, RoHS |
| Warranty | 5 Years |
Documentation
Frequently Asked Questions
What is the humidity sensor accuracy?
±2% RH at 25°C (77°F) across the 20 to 80% RH range, using a capacitive polymer sensing element. Field calibration adjustment of ±5% RH in 0.1% increments is available.
What temperature sensor is included in the BA/HQF-E-C-1-X60-X?
This unit is configured with a 20K Thermistor. The temperature sensor is passive (resistance output) and connects to terminals SEN1 and SEN2.
What does the display show?
The high-contrast LCD displays temperature in °F and relative humidity in %RH. Display options can be configured via programming pages including rotating, fixed major/minor, and single-value modes.
Can this sensor be field-calibrated?
Yes. Both temperature offset (P1) and humidity offset (P2) are set via the unit's programming pages in ±0.1° / ±0.1% RH increments. Enter Program Mode by setting DIP Switch S1 #1 (PAGES) to ON. A high-accuracy reference is recommended.
What mounting options are supported?
Standard 2"x4" junction box, drywall mount with included anchors, or European junction box (60mm mounting centers using the BA/HQ60 variants). Mounting screws are included.
