The BAPI Wireless Voltage Output Module (BA/VOM-BLE-EZ) converts temperature data received from the BAPI Wireless Receiver into a linear 0 to 5 VDC signal for the BAS controller. This variant is scaled for -20 to 120°F (-29 to 49°C). Wide range for outdoor air and freezer-adjacent applications. With 150 microvolt output resolution and 4K ohm minimum load, it is compatible with virtually all DDC analog voltage inputs.
Best for: BAS controllers with 0 to 5 VDC temperature analog inputs that need wireless sensor data without any controller reprogramming.
Carries BAPI's 5-year warranty. On lost comm (35 minutes without transmission), the output reverts to 0V (indicates low temperature) so the controller detects a fault condition. Recovers automatically on next transmission.
0 to 5 VDC Output — Factory Calibrated
Linearly scaled temperature output from -20 to 120°F (-29 to 49°C). Factory calibrated, 150 µV resolution, 4K ohm minimum load. No field adjustment required.
Direct Drop-In for Hardwired Sensors
Connects to the controller's 0 to 5 VDC temperature input exactly like a hardwired transmitter. No controller programming changes needed.
Powered Through Receiver
Powers in-line through the BAPI BLE Receiver for up to 10 modules. Remote mounting beyond 100 ft requires a separate 15 to 24 VDC supply.
Lost Comm Protection
After 35 minutes without a transmission, the output reverts to 0V (indicates low temperature). Recovers automatically when the next transmission is received.
| Specification | Value |
|---|---|
| Part Number | BA/VOM-BLE-05-H-F-EZ |
| Output Voltage | 0 to 5 VDC |
| Range | -20 to 120°F (-29 to 49°C) |
| Output Resolution | 150 µV |
| Output Current | 2.5 mA @ 4K ohm load |
| Minimum Load Resistance | 4K ohm |
| Supply Power | 15 to 24 VDC or powered through receiver |
| Power Consumption | 25 mA @ 24 VDC |
| Lost Comm Timeout | 35 minutes — reverts to 0V (indicates low temperature) |
| Operating Temp | 32 to 140°F (0 to 60°C) |
| Mounting | Surface, 2.75 in snaptrack, or 35mm DIN rail |
| Agency | RoHS |
| Warranty | 5 Years |
- Module Type:
- Analog Output Module
- Output Type:
- Voltage
- Output Voltage:
- 0 to 5 VDC
- Measures:
- Temperature
- Temp Range:
- -20 to 120 F