Skip to main content

BAPI ZPS-SR-EZ-ST-IN : EZ Pressure Sensor Mounted on Din Rail, Standard Range Unit, Inches WC, LCD Display, Static Pressure Probe, Snaptrack, DIN Rail or Surface Mounting, 5-Year Warranty

BAPI

MSRP: $360.00
$162.00
(You save $198.00 )
(No reviews yet) Write a Review
SKU:
ZPS-SR-EZ-ST-IN
Condition:
New
Availability:
Ships in 1-3 Days
Adding to cart… The item has been added

BAPI ZPS-SR-EZ-ST-IN : EZ Pressure Sensor Mounted on Din Rail, Standard Range Unit, Inches WC, LCD Display, Static Pressure Probe, Snaptrack, DIN Rail or Surface Mounting, 5-Year Warranty

Measuring building pressures doesn’t get any easier than with the EZ Pressure. The revolutionary mounting system allows for snaptrack, DIN rail or surface mounting, and the 3 Outputs and 10 Ranges are field selectable via the dial and button. Besides being easy to set up and install, it is also extremely accurate – even at low pressures.

  • 10 Field Selectable Pressure Ranges and 3 Field Selectable Outputs
  • Standard Pressure Ranges from -5 to +5 WC or -1,250 to +1,250 Pascals
  • NIST Certificate Included with Each Unit at No Extra Charge
  • Snaptrack, DIN Rail or Surface Mounting

Specifications

Power:
  • 7 to 40 VDC (4 to 20 mA Output)
  • 7 to 40 VDC or 6 to 28 VAC (0 to 5 or 1 to 5 VDC Output)
  • 12 to 40 VDC or 9 to 28 VAC (0 to 10 or 2 to 10 VDC Output)
Power Consumption:
  • 20 mA max, DC only at 4 to 20 mA Output
  • 4.9 mA max DC at 0 to 5 or 0 to 10 VDC Output 
  • 0.12 VA max AC at 0 to 5 or 0 to 10 VDC Output
Load Resistance: 4 to 20 mA Output 850 Ω Maximum @ 24 VDC
0 to 5, 1 to 5, 0 to 10, 2 to 10 VDC Output 6Ω min.
System Accuracy: ±0.25% FS at 72°F (22°C) for all units
Stability: ±0.25% F.S. per year
Media: Clean, dry, non-corrosive gases
Compensated Temperature Range: 32 to 122°F (0 to 50°C)
Environmental Operating Range: 14°F to 140°F (-10°C to 60°C)
Storage Temp.: -40 to 203°F (-40 to 95°C)
Humidity: 0 to 95% RH, non-condensing
Wiring: Removable terminal block (14 to 24 AWG)* 2 wires (4 to 20mA Current loop)*
3 wires (AC or DC powered, Voltage out)*
Port Size: 1/4” barb (1/8” to 3/16” I.D.)
Enclosure Material: ABS Plastic, UL94 V-0
Mounting: DIN Rail, Snaptrack or Surface
Agency: RoHS, UL

 

Datasheets

pdf logo BAPI EZ Pressure Sensor, Standard and Low Ranges, Datasheet for Submittal
pdf logo EZ Pressure Sensor, Standard Ranges, Instructions
pdf logo Frequently Asked Questions - BAPI's Pressure Line of Products
Output Signal:
4-20 mA, 0-5 VDC, or 0-10 VDC
Pressure Type:
Differential
Pressure Ranges:
0 to 5 Inch
Media:
Dry
Accuracy:
0.25%
LCD Display:
LCD Display
Zero Function:
Yes
Range Setting:
Adjustable
Communication:
None
Series:
EZ Series