The BAPI ZPS-ACC04-60 is a BAPI-Stat “Quantum” enclosure zone pressure pickup port with 60mm mounting base. Styled to match the BAPI-Stat Quantum room sensor line, it integrates seamlessly with existing BAS hardware while the integral 80 micron sintered stainless steel filter protects sensing tubing from debris and blockage.
Quantum Enclosure Style
The Quantum form factor matches BAPI-Stat room sensors across the product line—when multiple sensor types occupy the same zone, the pickup port and temperature/humidity sensors share the same housing profile and finish.
60mm European Mounting Base
Sized for 60mm European-standard wall boxes, enabling clean installation in international commercial facilities and projects built to European electrical infrastructure standards.
Specifications
| ZPS-ACC04-60 Zone Pressure Quantum Pickup Port | |
|---|---|
| Port Style | BAPI-Stat Quantum Enclosure |
| Mounting Base | 60mm Mounting Base |
| Housing Material | ABS Plastic, UL 94 V-0 |
| Dimensions | 1.99 in [50.4 mm] W × 4.71 in [119.7 mm] H; 3.31 in [84.1 mm] D |
| Sensing Tubing I.D. | 1/8" to 5/32" |
| Inlet Filter | 80 Micron Sintered Stainless Steel |
| Operating Temp Range | 32 to 122°F (0 to 50°C) |
| Humidity Range | 0% to 95% RH, non-condensing |
| Temperature Sensor | Not included |
Frequently Asked Questions
Can a temperature sensor be added to this pickup port?
Yes. The ZPS-ACC04-60 series supports optional factory-installed thermistor and RTD temperature sensors, identified by the suffix appended to the base model number. For example, ZPS-ACC04-60-102 includes a 10K-2 thermistor for simultaneous zone pressure and temperature sensing from a single device.
What is the difference between ZPS-ACC04 and ZPS-ACC04-60?
Both models share the same Quantum enclosure, static pressure pickup port, and 80 micron sintered filter. The ZPS-ACC04 uses a standard North American mounting base; the ZPS-ACC04-60 uses a 60mm base designed for European-standard wall boxes common in international commercial projects.
Is this compatible with all BAPI zone pressure sensors?
Yes. Connect the pickup port to any BAPI ZPS series pressure sensor via standard sensing tubing routed through the wall or conduit. No special adapters are required.