The Belimo AMCX24-MFT-T N4 is a non-spring-return damper actuator delivering 180 in-lb [20 Nm] of torque with field-programmable MFT control that ships set for 2-10 VDC by default on AC/DC 24 V power. It direct-couples to damper shafts up to 1.05 in. diameter and holds its last position on loss of power (it is non-fail-safe, with no spring return), making it part of Belimo's configurable AMX platform for commercial HVAC damper control where fail-safe operation is not required. It runs 90° of travel in a fast 35 seconds. Field wiring is via a screw-terminal strip (26-14 AWG). Its NEMA 4X housing suits washdown and wet or outdoor locations.
Specifications sourced from the official Belimo AMCX24-MFT-T N4 technical data sheet (rev 2025-12-24).
Overview
Belimo AM-Series actuators are non-spring-return drives for commercial HVAC dampers — they position the damper under power and hold the last commanded position when power is removed (there is no spring-return fail-safe). The AMCX24-MFT-T N4 produces 180 in-lb [20 Nm] of torque and mounts directly to the damper shaft. It completes 90° of travel in a fast 35 seconds. It ships set for 2-10 VDC modulating control — the same behavior as the SR model — while Multi-Function Technology lets you field-select other signals, ranges and feedback (variable VDC, on/off, floating point, PWM) under one part number.
Best for
- Modulating control with field-selectable signal (2-10 VDC default)
- Non-spring-return damper and louver positioning (180 in-lb)
- Direct shaft mount up to 1.05 in. diameter
- Faster actuation (35-second run time)
- Installations that prefer screw-terminal wiring
- Washdown, wet and outdoor / high-humidity locations
Key Features
Non-Spring-Return Design
Holds the last commanded position when power is removed (non-fail-safe). Lower cost and power draw than a spring-return actuator where fail-safe operation is not required.
180 in-lb Torque
Direct-couples to damper shafts up to 1.05 in. diameter and sizes a wide range of commercial dampers and louvers.
MFT — 2-10 VDC by Default
Ships set for 2-10 VDC modulating control (same as the SR). Field-select other signals and ranges (variable VDC, on/off, floating point, PWM) under one part number.
Fast 35-Second Run Time
Drives 90° of travel in about 35 seconds — faster actuation without a spring return.
Screw-Terminal Wiring
Field wiring lands on a screw-terminal strip (26-14 AWG) instead of a pre-wired cable — convenient for panel and conduit installs.
NEMA 4X Enclosure
Rated NEMA 4X / UL Type 4X for washdown, high-humidity, wet and outdoor damper applications.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Belimo |
| Part Number | AMCX24-MFT-T N4 |
| Actuator Type | Non-Spring-Return (Non Fail-Safe) Damper Actuator |
| Nominal Voltage | AC/DC 24 V |
| Nominal Frequency | 50/60 Hz |
| Power Consumption (Running) | 3.5 W |
| Transformer Sizing | 6 VA |
| Torque | 180 in-lb [20 Nm] |
| Control Signal | Modulating, field-programmable (MFT) — ships set for 2-10 VDC by default |
| Selectable Modes | 2-10 VDC (default), variable VDC, On/Off, Floating Point, PWM |
| Position Feedback (U) | 2-10 VDC default, VDC variable (max. 0.5 mA) |
| Angle of Rotation | Max. 95° (adjustable mechanical stop) |
| Running Time (Motor) | 35 s / 90° Running time motor note constant, independent of load |
| Behavior on Power Loss | Holds last position (non-spring-return) |
| Manual Override | Self-locking; declutch / hand crank per model |
| Direction of Motion | Selectable (CW/CCW) |
| Electrical Connection | Screw terminal strip (26-14 AWG) |
| Overload Protection | Electronic, full 0-95° rotation |
| Electrical Protection | Double insulated (Class 2) |
| Enclosure Rating | NEMA 4 / UL Type 4 |
| Ambient Temperature | -22 to 122°F [-30 to 50°C] |
| Agency Listing | cULus (UL60730-1A / -2-14, CAN/CSA) |
| Quality Standard | ISO 9001 |
| Weight | 2.2 lb [1 kg] |
| Warranty | 5 Years |
Documentation
Related Products
Accessories & Mounting
Common Belimo accessories for mounting, signaling and protecting the AMCX24-MFT-T N4, drawn from the actuator datasheet. All are stocked by ZOT Supply as an authorized Belimo distributor.
Mounting & Shaft
Electrical Add-Ons
Enclosures & Weather Shields
Frequently Asked Questions
What is the Belimo AMCX24-MFT-T N4?
The Belimo AMCX24-MFT-T N4 is a non-spring-return (non-fail-safe) damper actuator for commercial HVAC. It produces 180 in-lb [20 Nm] of torque, uses field-programmable MFT control (set for 2-10 VDC by default) on AC/DC 24 V power, and holds its last position on loss of power. Its housing is rated NEMA 4.
Is the AMCX24-MFT-T N4 a spring-return (fail-safe) actuator?
No. The AMCX24-MFT-T N4 is non-spring-return: when power is lost it holds its last commanded position rather than driving to a fail-safe position. If you need the damper to fail to a known open or closed position on power loss, choose a spring-return Belimo AF/AM-Series actuator instead.
What happens to the AMCX24-MFT-T N4 when power is lost?
It stays put. A non-spring-return actuator maintains its last position when power is removed and resumes from there when power returns — there is no spring to drive it to a fail-safe position.
What torque does the AMCX24-MFT-T N4 provide and what shaft sizes does it fit?
It delivers 180 in-lb [20 Nm] and direct-couples to round or square damper shafts up to 1.05 in. diameter using its universal clamp.
What control signal does the AMCX24-MFT-T N4 use?
It uses field-programmable MFT control (set for 2-10 VDC by default). Because it is MFT, you can field-select other modes (variable VDC, on/off, floating point, PWM) and ranges without changing the part number.
What is the running time of the AMCX24-MFT-T N4?
Motor running time is about 35 s / 90° Running time motor note constant, independent of load for 90 degrees of travel. That faster run time suits applications needing quicker damper response.
Is the AMCX24-MFT-T N4 the same as the SR (2-10 VDC) version?
Functionally yes — it ships set for 2-10 VDC modulating control, identical to the SR model. The difference is that Multi-Function Technology lets you field-select other control signals, ranges and feedback, so one part number covers many specifications.
What does the -T in AMCX24-MFT-T N4 mean?
The -T denotes a screw-terminal strip for field wiring (26-14 AWG) in place of the standard pre-wired cable and conduit connector. The actuator is otherwise identical.
Can the AMCX24-MFT-T N4 be used outdoors or in washdown areas?
Yes. The AMCX24-MFT-T N4 carries a NEMA 4 housing rating, making it suitable for washdown, high-humidity, wet and outdoor damper applications.
Is the Belimo AMCX24-MFT-T N4 available from an authorized Belimo distributor?
Yes. ZOT Supply is an authorized Belimo distributor and carries the AMCX24-MFT-T N4. Every unit ships factory new with Belimo's full 5-year warranty and application support from our team.
- Actuator Type:
- Non-Spring-Return
- Torque:
- 180 in-lb
- Control Signal:
- Programmable (MFT)
- Voltage:
- 24 VAC/DC
- Auxiliary Switch:
- No
- NEMA 4X Enclosure:
- Yes
- Series:
- AMX
- Feedback Signal:
- 2-10 VDC
