Belimo EP100+LRX-E : Pressure Independent Valve (EPIV), 2-Way, 1" Valve, 18.2 GPM, Non-Safe Actuator, 24VAC/DC, Modulating Control or Communication via BACnet MS/TP, Modbus RTU, Belimo-MP-Bus, IP54 NEMA 2 Rating
Valve specifications
| Angle of Rotation | 90 |
| End Fitting | Internal Thread |
| Flow | 18.2 |
| Fluid | Chilled or hot water, up to 60% glycol max (open loop/steam not allowed) |
| Pattern | 2-Way |
| PI-Technology | Electronic |
| Pressure Independent | YES |
| Sensor Technology | Ultrasonic with glycol and temperature compensation |
| Trim | Stainless steel |
| Valve Size | 1" |
Actuator specifications
| Actuator Type | Non fail-safe |
| Control Type |
|
| Degree of Protection | IP54, NEMA 2, UL Enclosure Type 2 |
| Electrical Connection | cable |
| Manual Override | External push button |
| Power Consumption (Holding) | 1.3 W |
| Power Consumption (Running) | 3.5 W |
| Running Time (Fail-safe) | <35 s |
| Running Time (Motor) | 90 s |
| Voltage AC/DC | AC/DC 24 V |
Datasheets
 | Belimo EP100+LRX-E Technical Data Sheet |
| Installation Instructions - EPIV 4 |
| PI and EV Series Master Format |
- Valve Pattern:
- 2-Way
- Valve Size:
- 1 Inch
- GPM:
- 18.2
- Actuator Type:
- Non Fail-Safe
- Voltage:
- 24VAC/DC
- Communication:
- BACnet MS/TP, Modbus RTU, MP-Bus
- Enclosure:
- NEMA 2
