The Belimo NMQX24-1 is a quick-running non-spring-return damper actuator delivering 70 in-lb [8 Nm] of torque with on/off (two-position) control on AC/DC 24 V power. It direct-couples to round or square damper shafts up to 1.05 in. with a universal clamp and holds its last position on loss of power (non-fail-safe, no spring return), making it part of Belimo's configurable NMX platform for large commercial HVAC dampers. Its quick 4-second running time suits fast-response damper control.
Specifications sourced from the official Belimo NMQX24-1 technical data sheet (rev 2023-08-11).
Overview
Belimo NM-Series actuators are non-spring-return drives for commercial HVAC control dampers — they position the damper under power and hold the last commanded position when power is removed (there is no spring-return fail-safe). The NMQX24-1 produces 70 in-lb [8 Nm] and mounts directly to round or square damper shafts up to 1.05 in. with its universal clamp (a crank arm and brackets are available for jackshaft and linkage applications); manual positioning uses an external push button. This NMQ model uses a quick 4-second motor for fast-response applications. Two-position on/off control positions the damper from a controller, relay or switch.
Best for
- Commercial HVAC control dampers (70 in-lb)
- Non-spring-return applications (no fail-safe required)
- Outdoor-air, mixing-box and zone dampers
- Fast-response control (4-second running time)
Key Features
70 in-lb Torque
Sized for commercial HVAC dampers; direct-couples to round or square damper shafts up to 1.05 in. with a universal clamp.
Non-Spring-Return Design
Holds the last commanded position when power is removed (non-fail-safe). Lower cost and power draw than a spring-return where fail-safe is not required.
On/Off Control
Accepts two-position on/off control from a controller, relay or switch.
Quick 4-Second Running Time
A quick-running motor drives 90° in about 4 seconds — for fast-response damper and pressure control.
Push-Button Manual Override
An external push button declutches the gear train so you can position the damper by hand for setup or service.
cULus Listed
Double-insulated (Class 2), cULus listed and ISO 9001 built for long, maintenance-free service.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Belimo |
| Part Number | NMQX24-1 |
| Actuator Type | Non-Spring-Return (Non Fail-Safe) Damper Actuator |
| Nominal Voltage | AC/DC 24 V |
| Nominal Frequency | 50/60 Hz |
| Power Consumption (Running) | 13 W |
| Torque | 70 in-lb [8 Nm] (minimum) |
| Control Signal | On/Off (two-position) |
| Shaft Range | Up to 1.05 in. [26.7 mm] via universal clamp; crank arm available |
| Angle of Rotation | 95° (adjustable mechanical stops) |
| Running Time (Motor) | 4 s / 90° — factory default; field-adjustable 35-150 s |
| Behavior on Power Loss | Holds last position (non-spring-return) |
| Manual Override | External push button (self-locking gear) |
| Direction of Motion | Selectable with 0/1 switch |
| Electrical Connection | 18 AWG plenum cable, 3 ft [1 m], 1/2" NPT connector |
| Overload Protection | Electronic, full 0-95° rotation |
| Electrical Protection | Double insulated (Class 2) |
| Enclosure Rating | NEMA 2 / UL Type 2 |
| Ambient Temperature | -22 to 122°F [-30 to 50°C] |
| Agency Listing | cULus (UL60730-1A/-2-14, CAN/CSA) |
| Quality Standard | ISO 9001 |
| Plenum Rated | UL 2043 (suitable for air plenums) |
| Weight | 2.2 lb [0.99 kg] |
| Warranty | 5 Years |
Documentation
Related Products
Accessories & Mounting
Common Belimo accessories for mounting, linkage, signaling and powering the NMQX24-1, drawn from the actuator datasheet. All are stocked by ZOT Supply as an authorized Belimo distributor.
Mounting & Linkage
Electrical Add-Ons
Frequently Asked Questions
What is the Belimo NMQX24-1?
The Belimo NMQX24-1 is a non-spring-return (non-fail-safe) damper actuator for commercial HVAC. It produces 70 in-lb [8 Nm] of torque, uses on/off (two-position) control on AC/DC 24 V power, and holds its last position on loss of power. Its housing is rated NEMA 2.
Is the NMQX24-1 a spring-return (fail-safe) actuator?
No. The NMQX24-1 is non-spring-return: on power loss it holds its last position rather than driving to a fail-safe position. For fail-safe operation choose a spring-return Belimo actuator (such as the EF-Series) instead.
How much torque does the NMQX24-1 provide?
It delivers 70 in-lb [8 Nm] of torque, sizing it for fast-response and commercial HVAC dampers.
What shaft sizes does the NMQX24-1 fit?
It direct-couples to round or square damper shafts up to 1.05 in. using its universal clamp (K-NA). For jackshafts or off-shaft mounting, a crank arm and brackets (ZG-NMA, ZG-JSL) are available.
What control signal does the NMQX24-1 use?
It uses on/off (two-position) control. Two-position on/off control is driven from a controller, relay or switch.
What is the running time of the NMQX24-1?
The NMQX24-1 is a quick-running NMQ actuator with about a 4-second running time for 90 degrees — for fast-response damper and pressure control. It delivers 70 in-lb of torque.
How do you manually position the NMQX24-1?
Press the external manual-override push button to declutch the gear train, then turn the damper by hand for setup or service.
Is the Belimo NMQX24-1 available from an authorized Belimo distributor?
Yes. ZOT Supply is an authorized Belimo distributor and carries the NMQX24-1. Every unit ships factory new with Belimo's full 5-year warranty and application support.
- Actuator Type:
- Non-Spring-Return
- Torque:
- 70 in-lb
- Control Signal:
- On/Off
- Voltage:
- 24 VAC/DC
- Auxiliary Switch:
- No
- Enclosure:
- NEMA 2
- Series:
- NMQ
- Running Time:
- Quick (4 s)
