The R-G15-006 is a Belimo field-replaceable sensor module for Carbon Dioxide (CO₂) detection over the 0-10,000 ppm range using NDIR sensing. Sensor modules are swapped at the monitor without replacing the entire unit — the standard path for annual recalibration cycles and end-of-life sensor replacement.
Direct replacement sensor module for: 22G15-5B6, 22G15-5C6. The module installs into the monitor housing in the field; no return-to-factory service required.
Annual calibration replacement and end-of-life sensor swaps for installed 22G monitors. Keep a spare module on hand to minimize downtime during scheduled life-safety inspections.
Technical Specifications
| Specification | Detail |
|---|---|
| Type | Field-Replaceable Sensor Module |
| Measured Gas | Carbon Dioxide (CO₂) |
| Measuring Range | 0-10,000 ppm |
| Sensing Technology | NDIR |
| Calibration | Annual recalibration required per UL 2075 |
| Installation | Field-replaceable at the monitor |
| Manufacturer | Belimo |
| Manufacturer Part Number | R-G15-006 |
| Warranty | 5-year factory warranty |
Documentation
Frequently Asked Questions
What is the R-G15-006?
A field-replaceable CO2 sensor module (0-10,000 ppm, NDIR) for Belimo 22G gas monitors. It lets you replace just the sensing element at the monitor rather than the whole unit.
How often should the sensor be replaced?
Sensor modules require annual recalibration per UL 2075 and Belimo specifications. When a module fails calibration verification or reaches end-of-life, swap it at the unit — no factory return needed.
- Accessory Type:
- Sensor Module
- Measured Gas:
- CO2
- Gas Detection Range:
- 0-10,000 ppm
- Sensing Technology:
- NDIR
- Compatible With:
- Belimo 22G15-5B6 / 5C6
