Belimo UMB24Y-SR-F-L : Non-Fail Safe Damper Actuator, 8 in-lb torque, 24V AC/DC, 2-10V Control Signal, Mechanical interface Form fit 8x8 mm, Counter-Clockwise Rotation, Connector Plug, IP20 NEMA 1 Enclosure
Specifications
| Voltage AC/DC | AC/DC 24 V |
| Power Consumption (Running) | 1.5 W |
| Power Consumption (Holding) | 0.5 W |
| Power Consumption For Wire Sizing | 2.5 VA |
| Connection Supply Control | Connector Plug (Cable-side connector socket not included in scope of delivery) |
| Connection Plug | Molex Mini-Fit Jr. 39303035 |
| Torque | 9 in-lb [1 Nm] |
| Control Type | On/Off, Floating/3-point |
| Direction Of Motion Motor | counter-clockwise rotation |
| Manual Override | No |
| Angle of Rotation | 95 |
| Running Time (Motor) | 22 s / 90° |
| Mechanical Interface | Form fit 8x8 mm |
| Protection category | IP20 |
| Degree Of Protection NEMA | NEMA 1 |
| Enclosure Type | UL Enclosure Type 1 |
| Ambient Tempreture | -22...122°F [-30...50°C] |
Datasheets
 | Belimo UMB24Y-SR-F-L Technical Data sheet |
| Belimo UMB Series Installation Instructions |
| Belimo Mounting Methods Guide |
| Belimo Master Format |
- Actuator Type:
- Non Fail-Safe
- Torque:
- 8 in-lb
- Voltage:
- 24VAC/DC
- Control Signal:
- 2-10VDC
- Auxillary Switch:
- None
- NEMA 4X Enclosure:
- No
