Belimo ZG-ECON1 : Honeywell ECON retrofit kit with module bracket.
The ZG-ECON1 Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
The ZG-ECON1 Crank Arm Adaptor Kit includes:
- 1 ZG-112 Mounting Bracket
- 1 Logic Module Mounting Bracket (20477-00001)
- 1 KH-LF Crank Arm with Retaining Ring
- 1 KG6 Ball Joint
- 4 Male Spades
- 2 Bolts with Nuts
NOTE: May require crank arm and ball joints
The ZG-112 is provided with hole patterns to mount the LF series actuators in either a horizontal or vertical position to meet space requirements.
The ZG-112 Mounting Bracket is designed to mount the TF and LF series actuator in the same mounting locations as common foot mounted, crank arm style actuators. Hole patterns in the base match common HoneywellTM, SiebeTM (Barber ColemanTM), and Johnson ControlsTM actuators for easy retrofit.
USE WHEN REPLACING THESE ACTUATORS Honeywell M84... M7...
Datasheets
- Accessory Type:
- Mechanical Accessory
- Product Category:
- Crank Arm Adaptor Kits
