Belimo ZG-JSLA+AFXUP : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Fail-Safe Damper Actuator, "UP" - Universal Power : 24 to 240 VAC / 24 to 125 VDC, On/Off Control Signal, 5-Year Warranty
Belimo's ZG-JSL jackshaft linkage simplifies actuator installation on various jackshaft sizes (1⁄2" to 1.05"). Its unique design allows for flexible mounting configurations, including space-saving 90° positioning. The linkage features a built-in 3⁄4" steel shaft for direct coupling to compatible Belimo actuators (see chart), but remember, there's a torque reduction. So, always double-check if it meets your application's requirements.
Actuator Specifications
| Voltage AC/DC | AC 24...240 V / DC 24...125 V |
| Power Consumption (Running) | 7 W |
| Power Consumption (Holding) | 3.5 W |
| Power Consumption For Wire Sizing | 18 VA |
| Torque | 180 in-lb [20 Nm] |
| Control Type | On/Off |
| Direction Of Motion Motor | selectable by ccw/cw mounting |
| Direction of Rotation (Fail-Safe) | Reversible with cw/ccw mounting |
| Manual Override | 5 mm hex crank (3/16" Allen), supplied |
| Angle of Rotation | 95 |
| Running Time (Motor) | 75 s / 90° |
| Running Time (Fail-safe) | <20 s |
| Protection category | IP42 |
| Degree Of Protection NEMA | NEMA 2 |
| Enclosure Type | UL Enclosure Type 2 |
| Ambient Temperature | -22...122°F [-30...50°C] |
Datasheets
 | Belimo ZG-JSLA+AFXUP Technical Data Sheet |
| Mounting Installation Instructions ZG-JSL(A) |
| Jackshaft Brochure |
- Actuator Type:
- Fail-Safe
- Torque:
- 180 in-lb
- Voltage:
- 24 to 240 VAC / 24 to 125 VDC
- Control Signal:
- On/Off
- Auxillary Switch:
- None
- NEMA 4X Enclosure:
- No
