![Belimo ZG-JSLA+AMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable](https://cdn11.bigcommerce.com/s-ksbdsp5vfo/images/stencil/1280x1280/products/12317/27926/ZG-JSLA-AMCX24-MFT__78862.1696565175.png?c=1 "Belimo ZG-JSLA+AMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable")
![Dimensional Drawing for Belimo ZG-JSLA+AMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable](https://cdn11.bigcommerce.com/s-ksbdsp5vfo/images/stencil/1280x1280/products/12317/51953/JackshaftLinkage-47-ZG-JSLADimensions__55343.1708580286.png?c=1 "Dimensional Drawing for Belimo ZG-JSLA+AMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable")
![Belimo ZG-JSLA+AMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable](https://cdn11.bigcommerce.com/s-ksbdsp5vfo/images/stencil/500x659/products/12317/27926/ZG-JSLA-AMCX24-MFT__78862.1696565175.png?c=1 "Belimo ZG-JSLA+AMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable")
Belimo ZG-JSLA+AMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable
Belimo's ZG-JSL jackshaft linkage simplifies actuator installation on various jackshaft sizes (1⁄2" to 1.05"). Its unique design allows for flexible mounting configurations, including space-saving 90° positioning. The linkage features a built-in 3⁄4" steel shaft for direct coupling to compatible Belimo actuators (see chart), but remember, there's a torque reduction. So, always double-check if it meets your application's requirements.
Specifications
| Voltage AC/DC | AC/DC 24 V |
| Power Consumption (Running) | 4 W |
| Power Consumption (Holding) | 1.25 W |
| Power Consumption For Wire Sizing | 6 VA |
| Torque | 180 in-lb [20 Nm] |
| Control Type | MFT/Programmable |
| Direction Of Motion Motor | selectable with switch 0/1 |
| Manual Override | External push button |
| Angle of Rotation | 95 |
| Running Time (Motor) | 35 s / 90° |
| Running Time range (Motor) | 35...120 s |
| Protection category | IP54 |
| Degree Of Protection NEMA | NEMA 2 |
| Enclosure Type | UL Enclosure Type 2 |
| Ambient Tempreture | -22...122°F [-30...50°C] |
Datasheets
 | Belimo ZG-JSLA+AMCX24-MFT Technical Data Sheet |
| Mounting Installation Instructions ZG-JSL(A) |
| Jackshaft Brochure |
- Actuator Type:
- Non Fail-Safe
- Torque:
- 180 in-lb
- Voltage:
- 24VAC/DC
- Control Signal:
- MFT Programmable
- Auxillary Switch:
- None
- NEMA 4X Enclosure:
- No
![Belimo ZG-JSLA+NMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 90 in-lb [10 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable](https://cdn11.bigcommerce.com/s-ksbdsp5vfo/images/stencil/500x659/products/12343/27952/ZG-JSLA-NMCX24-MFT__58607.1696565278.png?c=1 "Belimo ZG-JSLA+NMCX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Configurable Damper Actuator, 90 in-lb [10 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, MFT/programmable")
