Belimo ZG-JSLA+AMX24-3-T : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Non Fail-Safe Damper Actuator, 180 in-lb Torque, 24VAC/DC, On/Off, Floating Point Control Signal, Terminal Strip, 5-Year Warranty
Belimo's ZG-JSL jackshaft linkage simplifies actuator installation on various jackshaft sizes (1⁄2" to 1.05"). Its unique design allows for flexible mounting configurations, including space-saving 90° positioning. The linkage features a built-in 3⁄4" steel shaft for direct coupling to compatible Belimo actuators (see chart), but remember, there's a torque reduction. So, always double-check if it meets your application's requirements.
Specifications
| Voltage AC/DC | AC/DC 24 V |
| Power Consumption (Running) | 2.5 W |
| Power Consumption (Holding) | 0.5 W |
| Power Consumption For Wire Sizing | 5.5 VA |
| Torque | 180 in-lb [20 Nm] |
| Control Type | Floating/3-point |
| Direction Of Motion Motor | selectable with switch 0/1 |
| Manual Override | External push button |
| Angle of Rotation | 95 |
| Running Time (Motor) | 95 s / 90° |
| Protection category | IP54 |
| Degree Of Protection NEMA | NEMA 2 |
| Enclosure Type | UL Enclosure Type 2 |
| Ambient Tempreture | -22...122°F [-30...50°C] |
Datasheets
 | Belimo ZG-JSLA+AMX24-3-T Technical Data Sheet |
| Mounting Installation Instructions ZG-JSL(A) |
| Jackshaft Brochure |
- Actuator Type:
- Non Fail-Safe
- Torque:
- 180 in-lb
- Voltage:
- 24VAC/DC
- Control Signal:
- On/Off, Floating Point
- Auxillary Switch:
- None
- NEMA 4X Enclosure:
- No
