Belimo ZG-JSLA+LF120-S US : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Fail-Safe Damper Actuator, 120VAC, On/Off Control Signal, (1)SPDT 3A @250V Aux Switch, 5-Year Warranty
Belimo's ZG-JSL jackshaft linkage simplifies actuator installation on various jackshaft sizes (1⁄2" to 1.05"). Its unique design allows for flexible mounting configurations, including space-saving 90° positioning. The linkage features a built-in 3⁄4" steel shaft for direct coupling to compatible Belimo actuators (see chart), but remember, there's a torque reduction. So, always double-check if it meets your application's requirements.
Actuator Specifications
Voltage AC/DC | AC 100...240 V |
Power Consumption (Running) | 5.5 W |
Power Consumption (Holding) | 3.5 W |
Power Consumption For Wire Sizing | 7.5 VA |
Auxiliary Switches | 1 x SPDT |
Torque | 35 in-lb [4 Nm] |
Control Type | On/Off |
Direction Of Motion Motor | selectable with switch 0/1 |
Direction of Rotation (Fail-Safe) | Reversible with cw/ccw mounting |
Angle of Rotation | 95 |
Running Time (Motor) | 75 s |
Running Time (Fail-safe) | <25 s |
Protection category | IP42 |
Degree Of Protection NEMA | NEMA 2 |
Enclosure Type | UL Enclosure Type 2 |
Ambient Temperature | -22...122°F [-30...50°C] |
Datasheets
Belimo ZG-JSLA+LF120-S US Technical Data Sheet | |
Mounting Installation Instructions ZG-JSL(A) | |
Jackshaft Brochure |
- Actuator Type:
- Fail-Safe
- Torque:
- 35 in-lb
- Voltage:
- 120VAC
- Control Signal:
- On/Off
- Auxillary Switch:
- Yes
- NEMA 4X Enclosure:
- No