Belimo ZG-JSLA+NMX24-MFT : Jackshaft Retrofit Linkage with Belimo Rotary Actuators + Non Fail-Safe Damper Actuator, 90 in-lb Torque, 24VAC/DC, Programmable (2-10VDC Default) Control Signal, 5-Year Warranty
Belimo's ZG-JSL jackshaft linkage simplifies actuator installation on various jackshaft sizes (1⁄2" to 1.05"). Its unique design allows for flexible mounting configurations, including space-saving 90° positioning. The linkage features a built-in 3⁄4" steel shaft for direct coupling to compatible Belimo actuators (see chart), but remember, there's a torque reduction. So, always double-check if it meets your application's requirements.
Specifications
Voltage AC/DC | AC/DC 24 V |
Power Consumption (Running) | 3.5 W |
Power Consumption (Holding) | 1.3 W |
Power Consumption For Wire Sizing | 6 VA |
Torque | 90 in-lb [10 Nm] |
Control Type | MFT/Programmable |
Direction Of Motion Motor | selectable with switch 0/1 |
Manual Override | External push button |
Angle of Rotation | 95 |
Running Time (Motor) | 95 s / 90° |
Running Time range (Motor) | 45...170 s |
Protection category | IP54 |
Degree Of Protection NEMA | NEMA 2 |
Enclosure Type | UL Enclosure Type 2 |
Ambient Tempreture | -22...122°F [-30...50°C] |
Datasheets
Belimo ZG-JSLA+NMX24-MFT Technical Data Sheet | |
Mounting Installation Instructions ZG-JSL(A) | |
Jackshaft Brochure |
- Actuator Type:
- Non Fail-Safe
- Torque:
- 90 in-lb
- Voltage:
- 24VAC/DC
- Control Signal:
- MFT Programmable
- Auxillary Switch:
- None
- NEMA 4X Enclosure:
- No