Belimo ZG-TF112 : TFB(X) crankarm adaptor kit includes (1) ZG-113 Mounting Bracket, (1) KH-TF-1 Crank arm with Retaining Clip and Bolts with Nuts
Application
The ZG-TF112 Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
- 1 ZG-113 Mounting Bracket
- 1 KH-TF-1 Crank arm with Retaining Clip
- 2 Bolts with Nuts
NOTE: May require crank arm and ball joints
The ZG-113 is provided with hole patterns to mount the TF series actuators in either a horizontal or vertical position to meet space requirements.
The ZG-113 Mounting Bracket is designed to mount the TF series actuator in the same mounting locations as common foot mounted, crank arm style actuators. Hole patterns in the base match common HoneywellTM, SiebeTM (Barber ColemanTM), and Johnson ControlsTM actuators for easy retrofit.
USE WHEN REPLACING THESE ACTUATORS Honeywell M84... M7...
Datasheets
 | Belimo ZG-TF112 Data Sheet |
- Accessory Type:
- Mechanical Accessory
- Product Category:
- Crank Arm Adaptor Kits
