null Skip to main content

Belimo ZONE315S-10+ZONE120NC : 3-Way Diverting 1/2" Sweat Zone Valve, Cv 1, Spring Return Actuator, AC 120V, On/Off, Normally Closed, 2-Year Warranty

Belimo

MSRP: $471.00
Your Price:  $211.95
(You save $259.05 )
(No reviews yet) Write a Review
SKU:
ZONE315S-10+ZONE120NC
Condition:
New
Availability:
Ships in 1-2 Days
Adding to cart… The item has been added
Valve1/2 in. sweat, 3-way diverting
Cv1
Close-off75 psi
ActuatorZONE120NC spring return, NC
SupplyAC 120 V
ControlOn/off, 2-wire

The Belimo ZONE315S-10+ZONE120NC is a 1/2 in. sweat, 3-way diverting zone valve assembly: the ZONE315S-10 forged brass valve (Cv 1, 75 psi close-off) with the ZONE120NC normally closed (NC) spring return actuator for AC 120 V, 2-wire on/off control.

Built for fan coil units, baseboards and other hydronic applications where fail-safe operation on 2-wire control is required, in systems with variable or constant flow. The compact assembly fits tight spaces where on/off control is needed.

Specifications per Belimo ZONE315S-10 technical data sheet rev 2023-01-10; ZONE315S-10+ZONE120NC assembly data sheet rev 2022-01-12. Reviewed 2026-10-09.

Best For

  • Fan coil units and baseboard heating
  • Hydronic systems with variable or constant flow
  • Sweat (solder) 1/2 in. pipe connections
  • AC 120 V thermostat or controller circuits switching a 2-wire on/off load

Warranty

Belimo covers the valve and the actuator with a 2-year warranty.

Key Features

3-way diverting body

Forged brass body, EPDM seat and housing seal, stainless steel stem; 300 psi body pressure rating.

Cv 1, 75 psi close-off

On/off diverting flow with ANSI Class III 0.1% leakage.

Spring return, NC

Spring return AC 120 V actuator for fail-safe operation on 2-wire on/off control.

Manual override

Hand lever override with integrated mechanical position indication.

cULus listed

CE and cULus listed; meets cULus requirements without an electrical ground connection. NEMA 1 / IP20.

1/2 in. sweat ends

Sweat (solder) connection for 1/2 in. pipe; DN 15 valve size.

Authorized Distributor

ZOT Supply is an authorized distributor of Belimo products.

Technical Specifications

Valve: Belimo ZONE315S-10

Valve size0.5 in. [DN 15]
Flow pattern3-way
Flow characteristicOn/off, diverting
Cv1
Close-off pressure75 psi
Body pressure rating300 psi
Leakage rateANSI Class III 0.1%
FluidChilled or hot water, up to 50% glycol
Fluid temperature range (water)32 to 212°F [0 to 100°C]
Pipe connectionSweat
Valve bodyForged brass
Housing sealEPDM
StemStainless steel
SeatEPDM
Suitable actuatorsZONE spring return
Valve weight0.88 lb [0.40 kg]

Actuator: Belimo ZONE120NC

ActuatorBelimo ZONE120NC spring return, NC
Nominal voltageAC 120 V
Nominal voltage frequency50/60 Hz
Power consumption in operation6.5 W
Transformer sizing7 VA
Electrical connection6 in. wire leads
ControlOn/off, 2-wire
Manual overrideHand lever
Angle of rotation90°
Noise level, motor35 dB(A)
Noise level, fail-safe35 dB(A)
Position indicationMechanical, integrated
Degree of protection IEC/ENIP20
Degree of protection NEMA/ULNEMA 1
EnclosureUL Enclosure Type 1
Agency listingCE, cULus
Quality standardISO 9001
Ambient temperature32 to 104°F [0 to 40°C]
Storage temperature-40 to 176°F [-40 to 80°C]
Ambient humidityMax. 95% RH, non-condensing
ServicingMaintenance-free
Housing materialGalvanized steel
WiringBlack leads: motor, switched by the thermostat

Assembled dimensions

A: actuator length4.0 in. [102 mm]
B: valve body length, port to port2.8 in. [70 mm]
C: pipe centerline to top of actuator3.5 in. [89 mm]
D: overall height4.8 in. [122 mm]
E / F: pipe centerline to side1.2 in. [30 mm] / 1.2 in. [31 mm]

FAQ

What is the Cv and close-off pressure of the Belimo ZONE315S-10+ZONE120NC?

Cv 1 with a 75 psi close-off pressure. The body pressure rating is 300 psi and the leakage rate is ANSI Class III 0.1%.

What pipe connection does the ZONE315S-10+ZONE120NC have?

1/2 in. sweat (solder) ends (DN 15).

What power does the ZONE315S-10+ZONE120NC actuator need?

AC 120 V, 50/60 Hz: 6.5 W in operation, transformer sizing 7 VA.

How is the ZONE315S-10+ZONE120NC wired?

Two-wire on/off: the thermostat switches power to the two black motor leads. Leads are 6 in. long.

What fluids can the ZONE315S-10+ZONE120NC control?

Chilled or hot water, up to 50% glycol, from 32 to 212°F [0 to 100°C].

2-year Belimo manufacturer warranty.
Valve Pattern:
3-Way
Valve Size:
1/2 Inch
Connection Type:
Sweat
CV Rating:
1.0
Actuator Type:
Fail-Safe
Voltage:
120VAC
Control Signal:
On/Off
Auxillary Switch:
None