The Caleffi 132060A is a QuickSetter flanged manual balancing valve with a built-in direct-reading flow meter, 2-1/2" ANSI B16.1 125 Class RF flanged connections, and a 30 - 105 GPM working range. The cast iron body and handwheel-operated control make it suited to large hydronic distribution mains, risers, and central plant circuits where flow must be set and verified without separate pressure gauges, charts, or differential pressure meters.
To balance a circuit, pull the flow meter operating ring, read the GPM value directly on the graduated scale, adjust the valve to the design flow rate, and release. The bypass closes automatically after the reading, isolating the flow meter during normal operation for reliable readings over time.
Best For
- Balancing distribution mains and risers in commercial hydronic systems
- Chilled water and heating plant circuits from 30 to 210 GPM
- Glycol-based systems up to 50% glycol concentration
- Retrofits standardizing on direct-reading balancing hardware
Key Features
Pull-Adjust-Release Flow Setting
The built-in flow meter reads GPM directly on a graduated scale while you adjust the valve, so one technician can balance the main in a single step.
Automatically Isolated Flow Meter
The bypass opens only while the operating ring is pulled and closes automatically when released, isolating the flow meter during normal operation.
Handwheel Operation
A 5-1/2" diameter handwheel gives controlled adjustment of the large-bore ball at line pressures.
ANSI Flanged Connections
ANSI B16.1 125 Class RF flanges bolt directly into commercial piping without transition fittings.
Family Consistency
Shares the QuickSetter reading method with the 1/2 to 2 inch threaded and press models, keeping balancing procedures identical across the project.
Technical Specifications
| Series | QuickSetter 132 Flanged |
| Connection | 2-1/2" ANSI B16.1 125 Class RF flanged |
| Flow Rate Working Range | 30 - 105 GPM |
| Flow Meter Accuracy | ±10% |
| Cv (Fully Open) | 87 |
| Max Working Pressure | 150 psi (10 bar) |
| Working Temperature Range | 14 to 230°F (-10 to 110°C) |
| Suitable Fluids | Water, glycol solutions (max 50% glycol) |
| Valve Body | Cast iron |
| Ball | Brass |
| Ball Control Stem | Chrome-plated brass |
| Ball Seal Seat | R-PTFE |
| Control Stem Guide | PTFE |
| Seals | Peroxide-cured EPDM |
| Flow Meter Body | Brass |
| Operation | 5-1/2" diameter handwheel |
Documentation
Technical Datasheet 01149/24 NA - QuickSetter 132 Series- Submittal Sheet 03201 NA - Flanged Connections 2-1/2 to 4 Inch
- Installation and Operation Instructions H0003350
Design Resources
Related Products
- Caleffi 132080A – 3" flanged, 38 - 148 GPM
- Caleffi 132100A – 4" flanged, 55 - 210 GPM
- Caleffi 132992A – 2" FNPT threaded QuickSetter, 12 - 50 GPM
Frequently Asked Questions
What flow range does the Caleffi 132060A cover?
The 132060A covers 30 - 105 GPM with a direct-reading graduated scale and ±10% accuracy. The flanged family spans 30 to 210 GPM across 2-1/2, 3, and 4 inch sizes.
What flange standard does the Caleffi 132060A use?
ANSI B16.1 125 Class RF flanges in 2-1/2 inch nominal size, mating directly to standard commercial hydronic piping.
Is the Caleffi 132060A low lead certified for potable water?
No. The flanged QuickSetter has a cast iron body and is intended for closed hydronic heating and chilled water systems, not potable water.
How is the Caleffi 132060A adjusted?
A 5-1/2" handwheel rotates the ball while the built-in flow meter displays GPM, so the valve is set to design flow in one operation.
What is the warranty on the Caleffi 132060A?
Caleffi covers this product under its standard two-year limited warranty against defects in material and workmanship. ZOT Supply is an authorized Caleffi distributor.
- Type:
- Static
- Series:
- QuickSetter
- Flow Rate Range (GPM):
- 30 to 105
- Temperature Gauge:
- No
- Connection Type:
- Flange
- Connection Size:
- 2-1/2 Inch
