The Caleffi CBN130900 is a pre-formed insulation shell sized for the 2" Flo-Set 130 series fixed orifice balancing valve (130900A). The closed cell expanded PE-X shell wraps the valve body to minimize heat loss in heating service and eliminate surface condensation in chilled water service, while leaving the adjustment knob and pressure test ports accessible.
Best For
- Chilled water circuits where bare valve bodies would condense and drip
- Hydronic heating circuits where balancing valves would otherwise be uninsulated
- Meeting project specifications requiring insulated valve bodies
Key Features
Exact-Fit Molding
Pre-formed to the 2" 130 series body, closing fully around the valve with no cutting or taping of pipe insulation.
Service Access Preserved
The adjustment knob and PT ports remain usable, so the circuit can be rebalanced or verified without stripping insulation.
Condensation Control
Closed cell expanded PE-X resists moisture absorption, preventing sweating on chilled water service.
Tool-Free Installation
The two-piece shell snaps over the installed valve in seconds, before or after commissioning.
Technical Specifications
| Fits Valve | Caleffi 130900A (2" Flo-Set 130 series) |
| Material | Closed cell expanded PE-X |
| Service | Hydronic heating and chilled water |
| Installation | Field installed, snap-on two-piece shell |
Documentation
Technical Datasheet 01251/22 NA - Flo-Set 130 Series- Submittal Sheet 02182-25 NA - Fixed Orifice Balancing Valve
Related Products
- Caleffi 130900A – 2" Flo-Set 130 series balancing valve this shell fits
Frequently Asked Questions
What valve does the Caleffi CBN130900 fit?
The CBN130900 fits the Caleffi 130900A, the 2" FNPT Flo-Set 130 series fixed orifice balancing valve. Each shell size is molded to one valve size only.
Can the valve be adjusted with the Caleffi CBN130900 installed?
Yes. The shell leaves the adjustment knob and pressure test ports accessible, so balancing and verification are done without removing insulation.
Is the Caleffi CBN130900 suitable for chilled water?
Yes. The closed cell expanded PE-X construction prevents surface condensation on chilled water service.
What is the warranty on the Caleffi CBN130900?
Caleffi covers this product under its standard two-year limited warranty against defects in material and workmanship. ZOT Supply is an authorized Caleffi distributor.
- Type:
- Accessory
- Series:
- Flo-Set 130
- Connection Size:
- 2 Inch
