PS48HD-P-N-N — PowerScout 48 HD Multi-Circuit Power Submeter
The Dent Instruments PS48HD-P-N-N is the PowerScout 48 HD, DENT's networked 48-channel, three-phase submeter. The PS48HD-P-N-N measures voltage, current, power, energy, and many other electrical parameters on any combination of single- and three-phase loads — up to 16 three-phase or 48 single-phase circuits across two voltage references — and can network with other PowerScout HD meters to cover multiple loads across a facility.
Looking ahead? The PowerScout FLEX 48 is DENT's next-generation replacement for the PowerScout HD — faster commissioning with FLEXPoint™, browser-based FLEXPoint™ GO, flexible Virtual Meters, and 7.2 kHz sampling.
See the PowerScout FLEX 48 →The PS48HD-P-N-N delivers revenue-grade performance with 1.8 kHz sampling, a 1-second update rate, and ANSI C12.20-2010 Class 0.2 accuracy (depending on CT). It supports both Modbus (SunSpec IEEE-754) and BACnet over RS-485 or Ethernet, includes four digital pulse inputs, and provides a 12 VDC auxiliary output. DENT's patented PhaseChek™ circuitry (U.S. Patent 7,612,552) confirms correct CT orientation during commissioning.
The PS48HD-P-N-N is the no-display configuration, commissioned and read through ViewPoint HD or the network — a good fit for panel and enclosure builds where a local screen is not required.
Built as a UL-Recognized circuit board on a mounting plate, the PS48HD-P-N-N is delivered in the Mounting Plate configuration and is configured through ViewPoint HD PC software or a web browser. It operates as an endpoint reporting to a building management system, RTU, or data acquisition device.
Best for
- High-density tenant and accountability submetering — up to 48 circuits from one device
- Bi-directional metering and demand-response monitoring
- Real-time power monitoring of building mains and equipment loads
- Networked metering of many loads alongside other PowerScout HD meters
- Projects requiring BAA / TAA compliant equipment
Key Features
Revenue-Grade Accuracy + PhaseChek™
The PS48HD-P-N-N meets ANSI C12.20-2010 Class 0.2 revenue-grade accuracy (dependent on CT) with NIST-traceable calibration, and patented PhaseChek™ circuitry (U.S. Patent 7,612,552) flags mis-phased or backwards CTs during commissioning.
Dual-Protocol + 4 Pulse Inputs
The PS48HD-P-N-N communicates over Modbus (SunSpec IEEE-754) or BACnet using RS-485 or Ethernet (Modbus RTU, BACnet MS/TP, Modbus TCP, or BACnet IP) and adds four digital pulse inputs for gas, water, or other meters.
48 Channels, One Device
Meter up to 16 three-phase or 48 single-phase circuits across two voltage references from a single PS48HD-P-N-N, reducing hardware and panel space versus single-circuit meters.
ViewPoint HD Setup
Configure the PS48HD-P-N-N from ViewPoint HD or a web browser, scan the network to find and name every PowerScout HD meter, and pre-build configuration templates — even without the meter on hand — for fast, repeatable deployment.
Universal CT Compatibility
Use the PS48HD-P-N-N with DENT 333 mV Split Core or RōCoil™ (Rogowski) CTs, including revenue-grade options, measuring up to 4000 A depending on the CT selected.
BAA & TAA Compliant
DENT Instruments marks the PowerScout 48 HD Buy American Act (BAA) and TAA compliant, supporting government, healthcare, and institutional procurement requirements.
Technical Specifications
| Specification | PS48HD-P-N-N |
|---|---|
| Model / Part Number | PS48HD-P-N-N |
| Series | PowerScout 48 HD (48-channel, 3-phase) |
| Channel Capacity | Up to 16 three-phase or 48 single-phase circuits; 2 voltage references |
| Service Type | Single Phase, Three Phase-Four Wire (WYE), Three Phase-Three Wire (Delta) |
| Power | From L1 Phase to L2 Phase. 90-600 VAC RMS, CAT III, 50/60 Hz, 500 mA AC Max |
| Auxiliary Power Out | Unregulated 12 VDC, 200 mA, self-resetting fuse (requires 100 VAC minimum input) |
| AC Protection | 0.5 A fuse, 200 kA interrupt capacity |
| Voltage Channels | 90-346 VAC Line-to-Neutral, 600 V Line-to-Line, CAT III; two voltage reference inputs |
| Current Channels | 48 channels, 0.525 VAC max, 333 mV CTs, 0-4000 A depending on CT |
| Maximum Current Input | 150% of CT rating (mV CTs) to maintain accuracy; up to 4000 A with RōCoil CTs |
| Pulse Inputs | 4 inputs to a customer dry-contact pulse output; max pulse rate 10 Hz (50 ms min transition) |
| Measurement Type | True RMS using high-speed DSP with continuous sampling |
| Accuracy | 0.2% — ANSI C12.20-2010 Class 0.2; NIST traceable calibration |
| Resolution | 32-bit IEEE-754 single-precision floating point |
| Line Frequency | 50/60 Hz (45-70 Hz measurable range); measured L1-N |
| Waveform Sampling | 1.8 kHz |
| Parameter Update Rate | 1.0 second |
| Measurements | Volts, Amps, kW, kVAR, kVA, aPF, dPF, kW demand, kVA demand, Import/Export/Net kWh, kVAh and kVARh, THD, Theta, Frequency — per phase and element total |
| Display | No display (configured via ViewPoint HD / network) |
| Communications Hardware | RS-485, Ethernet, and USB (USB for configuration only) |
| Supported Protocols | Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP (Modbus based on SunSpec IEEE-754) |
| Communication Rate | 9600 (default), 19200, 38400, 57600, 76800, 115200 baud |
| Max Communication Length | 1200 m at 100K bits/second or less |
| Alarm Output | Phase-loss / undervoltage (open collector, 30 VDC max) |
| Web Page Security | 2 levels of PIN protection (Read/Write or Read-Only) |
| Mounting | Open circuit board on a mounting plate for installation in the UL-approved enclosure of your choice |
| High-Voltage Cover | Not included on mounting-plate version |
| Enclosure | Not included; circuit board on mounting plate for installation in a UL-approved enclosure of your choice |
| Mounting Plate Dimensions | 26.2 x 24.1 x 8.0 cm (10.3 x 9.5 x 3.1 in) |
| Wire Connections | 12-28 AWG, 600 VAC; voltage connection must be #14 AWG or larger and 600 VAC rated |
| Operating Temperature | -20 to 60 °C (-4 to 140 °F). At -20 °C supply voltage must exceed 100 VAC; colder temperatures require higher supply voltage |
| Humidity | 5% to 95% non-condensing |
| Certifications | UL Recognized (E186827, UL 61010-1 3rd Ed.; CSA C22.2 No. 61010-1); CE (LVD EN61010-1, EMC EN61326-1); RoHS 2 (EN50581); ANSI C12.20 Class 0.2; Buy American Act (BAA) and TAA compliant |
| Configuration Software | ViewPoint HD (Windows 7 / 8 / 10 / 11) and web browser |
Specifications verified against the DENT Instruments PowerScout 48 HD datasheet, revision 01/03/2024. Manufacturer specifications are subject to change.
Documentation
- PDF PowerScout 48 HD Data Sheet
- PDF PowerScout HD Operator's Guide
- PDF Quick Start Guide
- PDF Commissioning Checklist
- PDF PowerScout HD Series Comparison
- PDF PowerScout to PS HD Migration Guide
- PDF Declaration of Conformity
Frequently Asked Questions
How many circuits can the PS48HD-P-N-N meter?
The PS48HD-P-N-N has 48 current channels and can meter up to 16 three-phase or 48 single-phase circuits, networked with other PowerScout HD meters to cover multiple loads across a facility.
What protocols does the PS48HD-P-N-N support?
The PS48HD-P-N-N supports Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP (Modbus based on SunSpec IEEE-754) over RS-485 or Ethernet, plus four digital pulse inputs.
Which current transformers work with the PS48HD-P-N-N?
The PS48HD-P-N-N uses DENT 333 mV Split Core or RōCoil™ (Rogowski) CTs, including revenue-grade options, and measures up to 4000 A depending on the CT selected.
What is the form factor of the PS48HD-P-N-N?
The PS48HD-P-N-N is supplied as a UL-Recognized circuit board on a mounting plate in the Mounting Plate configuration, measuring 26.2 x 24.1 x 8.0 cm (10.3 x 9.5 x 3.1 in).
Is the PS48HD-P-N-N revenue grade?
The PS48HD-P-N-N meets ANSI C12.20-2010 Class 0.2 revenue-grade accuracy, dependent on the CT selected, and ships with a NIST-traceable calibration.
What is the difference between the PS48HD-P-N-N and the PowerScout FLEX 48?
The PowerScout FLEX 48 is the next-generation replacement for the PowerScout 48 HD, adding FLEXPoint™ setup tools, browser-based FLEXPoint™ GO, Virtual Meters, and 7.2 kHz sampling. The PS48HD-P-N-N remains available; if you are specifying a new system, consider the PowerScout FLEX 48.
Is the PS48HD-P-N-N BAA and TAA compliant?
Yes. DENT Instruments marks the PowerScout 48 HD Buy American Act (BAA) and TAA compliant, supporting government and institutional procurement. Contact ZOT Supply if you need compliance documentation for a procurement file.
Warranty
This PowerScout Series meter is covered by DENT Instruments’ five-year (60-month) limited warranty from the invoice date. Warranty service requires an RMA and is subject to DENT’s current warranty terms — see the DENT Instruments warranty statement. Supplied by ZOT Supply, an authorized DENT Instruments distributor.
- Product Line:
- PowerScout HD
- Revenue Grade:
- Yes
- Accuracy Class:
- ANSI C12.20 Class 0.2
- Communication:
- Modbus RTU
- Communication:
- BACnet MS/TP
- Current Input:
- 333 mV
- Current Input:
- Rogowski
- Mounting:
- Mounting Plate
