Dent Instruments CT-HSC-050-U-7M : 50A High Performance Mini Split-Core Current Transformer; 0.4" (10mm) Opening; Current Range: 0.25 - 80A AC, Output 333 mV @ 25A AC, 7 Meter / 23' Lead
Dent's "Mini" CTs are compact and cost-effective current transformers delivering high accuracy (<0.5%) across a broad dynamic range, coupled with exceptional phase shift. Perfect for constrained spaces, like panel boards metering multiple loads. These "Minis" excel in current measurement, energy metering, load surveys, demand metering, energy research, and submetering. Easily open the CT with a screwdriver, connect it around the load conductor, ensuring it doesn't exceed the CT's rating. Reconnect the latch, ensuring a click for proper closure, and repeat if using multiple CTs. Connect the white and black wires to the measuring device terminals, and you're ready for seamless monitoring.
Key Features
- Small, low-cost current transformers
- Highly accurate: <0.5% over a wide, dynamic range
- Excellent phase shift
- Ideal where space is limited
- Compatible with all DENT power meters including ELITEpro Series and PowerScout Series instruments
- cURus
- CE
Specifications
| Window Size | 0.4” (10 mm) |
| Current Range | 0.25 - 80A AC |
| Output | 333mV@50AAC 6.66 mV/A AC |
| Ratio Error | <0.5% from 0.25 to 80A AC (typical) |
| Phase Error | <1.5° from 1 to 80A AC <2° From 0.25 to 1A AC |
Datasheets
 | Dent Instruments 50A Mini Hinged CT Data Sheet |
| Instructions for Mini Hinged CTs |
| CE Declaration of Conformity – Mini Hinged CTs |
Warranty Statement
DENT Instruments, Inc. promises buyer that any product sold by DENT Instruments, Inc. shall be free from material defects in design, materials, or manufacturing for the period shown on the current data sheet for that product beginning from the manufacture date; provided, however, that the warranty shall not extend to ordinary wear and tear, or to normally replaceable components (e.g., batteries and humidity sensor elements). During the warranty period, DENT Instruments, Inc. may repair or replace (at its sole discretion) any product suffering from a warranty defect and returned freight prepaid by buyer, with no charge to buyer for any warranty repair or replacement. The warranty shall remain in full force and effect for said period, provided that the product: (1) was installed, operated, and maintained properly; (2) has not been abused or misused; (3) has not been repaired, altered, or modified outside of DENT Instruments’ authorized facilities; (4) has not been sold subject to other warranty terms specified at the time of sale. This warranty provides specific legal rights that may be varied by local laws.
ROCOIL TCA-5
Seller warrants to Buyer that RoCoil TCA-5 products and accessories or services are free from substantial defect in material and workmanship under normal use given prior installation and maintenance for the period of 1 year (12 months) after delivery
CURRENT TRANSFORMERS
Seller warrants to Buyer that Current Transformer products or services are free from substantial defect in material and workmanship under normal use given prior installation and maintenance for the period of 1 year (12 months) after delivery
Buyer will promptly notify Seller of any defect in the product or service. Seller or its agent will have the right to inspect the product or workmanship on Buyer’s premises. Seller has the option to: (a) repair, replace or service at its factory or on Buyer’s premises the product or workmanship found to be defective; or (b) credit Buyer for the product or service in accordance with Seller’s depreciation policy. Refurbished material may be used to repair or replace the product. Products returned to Seller for repair, replacement or credit will be shipped prepaid by Buyer.
LIMITATION OF WARRANTY
CORRECTION OF DEFECTS BY REPAIR, REPLACEMENT, SERVICE OR CREDIT WILL BE AT SELLER’S OPTION AND CONSTITUTE FULFILLMENT OF ALL OBLIGATIONS TO BUYER FOR BREACH OF WARRANTY.
Seller assumes no warranty liability with respect to defects in the product caused by: (a) modification, repair, installation, operation or maintenance of the product by anyone other than Seller or its agent, except as described in Seller’s documentation; or (b) the negligent or other improper use of the product.
Other manufacturers’ equipment purchased by Seller and resold to Buyer will be limited to that manufacturers’ warranty. Seller assumes no warranty liability for other manufacturers’ equipment furnished by Buyer.
No agent, distributor, or representative is authorized to make any warranties on behalf of Seller or to assume for Seller any other liability in connection with any Seller product or service.
DISCLAIMER OF WARRANTY
Buyer understands and agrees as follows:
THE ABOVE WARRANTY REPLACES ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, & ALL OTHER OBLIGATIONS OR LIABILITIES OF SELLER, INCLUDING ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALL OTHER WARRANTIES ARE DISCLAIMED AND EXCLUDED BY SELLER.THE FOREGOING WILL BE THE SOLE AND EXCLUSIVE REMEDY WHETHER IN CONTRACT, TORT, OR OTHERWISE, & SELLER WILL NOT BE LIABLE FOR INJURIES OR DAMAGES CAUSED BY THE GROSS NEGLIGENCE OF SELLER. THIS LIMITATION APPLIES TO ALL SERVICES AND PRODUCTS DURING AND AFTER THE WARRANTY PERIOD.
LIMITATION OF REMEDIES
IN NO EVENT WILL SELLER BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR COMMERCIAL LOSSES EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILITY THEREOF.
GENERAL PROVISIONS
A. Seller reserves the right to subcontract any obligation hereunder.
B. No waiver will be valid unless in writing and no waiver granted will release Buyer from subsequent strict compliance herewith.
C. Seller is not liable for failure or delay in fulfilling its obligations under these Terms and Conditions due to causes beyond its reasonable control.
D. The laws of the State of Oregon, U.S.A. will apply to all transactions hereunder. Any action hereunder will be brought in Deschutes County, in the State of Oregon, U.S.A. Any claim, except for nonpayment, will be brought within one year of product shipment or completion of services and Buyer will be liable for any collection costs or attorney fees.
E. Claims for non-conforming orders must be submitted within 30 days from shipment date.
F. These Terms & Conditions together with Seller’s Order Acknowledgment constitute the entire agreement between the parties with respect to the subject matter hereof & supersede any prior of contemporaneous agreement or representation written or oral. Any amendment hereto must be written and signed by Seller.
- CT Style:
- Split-Core
