The Dwyer IF2717 is a Series IF industrial direct reading variable area flowmeter rated to 44 GPM (167 LPM) of water and 180 SCFM (5098 LPM) of air on a dual GPM and SCFM scale that reads flow directly, with no correlation charts. It installs vertically through 2 in. female NPT connections.
Best For
- Gas or liquid metering up to 44 GPM water or 180 SCFM air
- Industrial pneumatic or hydraulic systems
- Lines with 2 in. female NPT connections
- Process conditions up to 125 psi and 200°F (93°C)
Warranty
1-year limited warranty from delivery to the buyer under the DwyerOmega standard warranty.
Key Features
Dual GPM and SCFM Direct-Reading Scale
Reads water flow to 44 GPM and air flow to 180 SCFM directly, saving time with no correlation charts.
Polycarbonate Front Shield
A detachable, clear 3/16 in. thick polycarbonate front shield protects the flowtube at maximum rated temperature and pressure, with 304 stainless steel side panels.
316 Stainless Steel Wetted Parts
Borosilicate glass flowtube with 316 SS float, guide rods, float stops and end fittings, sealed by fluoroelastomer O-rings.
±3% Full-Scale Accuracy
±3% of full scale accuracy with ±0.5% of full scale repeatability and a 10:1 turn-down ratio.
Industrial Pressure Rating
Rated to 125 psi and 200°F (93°C) for industrial service.
2 in. Female NPT Connections
Tube size 5 body with 2 in. female NPT inlet and outlet ports for vertical in-line mounting.
ZOT Supply is an authorized distributor of Dwyer products.
Technical Specifications
| Model | IF2717 |
|---|---|
| Series | Dwyer Series IF Industrial Direct Reading Flowmeter |
| Service | Liquids or gases |
| Maximum Flow Rate, Water | 44 GPM (167 LPM) |
| Maximum Flow Rate, Air | 180 SCFM (5098 LPM) |
| Scale | Dual scale, GPM and SCFM |
| Tube Size | 5 |
| Pressure Drop | 30 inch WC |
| Accuracy | ±3% of full scale |
| Repeatability | ±0.5% of full scale |
| Turn-Down Ratio | 10:1 |
| Process Connection | 2 in. female NPT |
| Mounting | Vertical |
| Temperature Limit | 200°F (93°C) |
| Pressure Limit | 125 psi |
| Flowtube | Borosilicate glass |
| Float, Guide Rods, Float Stops, End Fittings | 316 stainless steel |
| O-Rings | Fluoroelastomer |
| Front Shield | Detachable clear polycarbonate, 3/16 in. thick |
| Side Panels | 304 stainless steel |
| Dimension A (Body Width) | 5 in. (127 mm) |
| Dimension B (Overall Length) | 15.59 in. (396 mm) |
| Dimension C (Body Depth) | 5.25 in. (133 mm) |
| Dimension D (Body Length) | 11.55 in. (293 mm) |
| NIST Traceable Calibration | Not available |
Documentation
Frequently Asked Questions
What is the maximum flow rate of the Dwyer IF2717?
The IF2717 reads water flow up to 44 GPM (167 LPM) and air flow up to 180 SCFM (5098 LPM) full scale.
What pipe connection size does the Dwyer IF2717 use?
The IF2717 has 2 in. female NPT inlet and outlet connections on a tube size 5 body.
What pressure and temperature is the Dwyer IF2717 rated for?
The IF2717 is rated to 125 psi and 200°F (93°C).
Can the Dwyer IF2717 measure both air and water?
Yes. The IF2717 has a dual GPM and SCFM direct-reading scale, covering water to 44 GPM and air to 180 SCFM.
How is the Dwyer IF2717 installed?
The IF2717 mounts vertically in-line through its 2 in. female NPT inlet and outlet connections.
Is NIST traceable calibration available for the Dwyer IF2717?
No. NIST traceable calibration is not available for the IF2717.
Specifications verified October 14, 2026 against the Dwyer Series IF catalog page 257 and drawing IF_DD.
- Series:
- IF
- Product Type:
- Variable Area Flowmeter
- Media:
- Water
- Media:
- Air
- Max Water Flow:
- 44 GPM
- Max Air Flow:
- 180 SCFM
- Connection Type:
- Female NPT
- Connection Size:
- 2 in.
- Max Pressure:
- 125 psi
- Max Temperature:
- 200°F
- Accuracy:
- ±3% FS
- Mounting:
- Vertical
- NIST Calibration:
- Not Available
