Best For
- Extending or replacing tape on a Dwyer WD detector
- Drip pans under HVAC equipment
- Computer rooms and telecommunication facilities
- Leak monitoring around pumps
Key Features
10 ft Coverage
Provides 10 ft (3.05 m) of continuous leak-sensing length along walls, drip pans, or equipment perimeters.
Hydrophobic Tape
The 1 in. wide sensing tape does not absorb liquid, allowing faster drying time and faster return to service after a water leak.
Plug-In Connection
Connects to the Dwyer WD module through a 15-pin cable connector for fast, tool-free attachment.
Extendable Coverage
Multiple tapes connect together end to end so you can cover large rooms or long equipment runs.
Includes Mounting Hardware
Supplied with an end-of-line (EOL) resistor and plastic clips; fold the tape on itself for sharp corners and keep it isolated from conduit and ground.
Technical Specifications
| Specification | Value |
|---|---|
| Compatible Module | Dwyer WD Water Detector |
| Service | Conductive liquid detection |
| Tape Width | 1 in. (25.4 mm) |
| Tape Length | 10 ft (3.05 m) |
| Construction | Hydrophobic water sensing tape |
| Connection | 15-pin cable connector |
| Expandable | Multiple tapes connect together |
| Included | EOL resistor and plastic mounting clips |
Documentation
Datasheet – Bulletin L-WDRelated Products
Frequently Asked Questions
Does the Dwyer TP10 tape need the WD module?
Yes. The TP10 sensing tape connects to the Dwyer WD water detector module, which provides power and the alarm relay.
How long is the Dwyer TP10 tape?
It provides 10 ft (3.05 m) of sensing length and is 1 in. (25.4 mm) wide.
Can I connect more than one tape?
Yes. Multiple sensor tapes can be connected together to extend the coverage area.
Does the sensor tape absorb water?
No. The tape is hydrophobic, so it does not absorb the liquid it detects, which gives faster drying and faster return to service.
What is included with the tape?
The tape ships with an end-of-line (EOL) resistor and plastic mounting clips for installation.
5-Year Limited Warranty. Dwyer Instruments warrants the Series WD water detector against defects in materials and workmanship under normal use. The Model WD is not field serviceable and should be returned for repair if needed; field repair may void the warranty. Contact customer service for a return goods authorization number before shipping.
- Tape-Length:
- 10 ft
- Media Compatibility:
- Conductive liquids
- Applications:
- Commercial and Industrial
- Switch Rating:
- N/A
