The DB2.2-4C is the 10%ED type braking resistor matched to the FRENIC-Mini (C2) inverter types listed below. It connects to terminals P(+) and DB on the inverter, which drives it from the built-in braking transistor. Maximum braking torque is 150% for every listed pairing.
Best for
- High-inertia loads that have to stop faster than a coast to stop
- Vertical or overhauling loads that push energy back into the drive
- Short repetitive cycles within the listed duty cycle
Key features
10%ED duty type
Rated for repetitive braking on a 100 second or less cycle at the duty cycle listed for each inverter pairing.
Matched resistance
160 ohm, one unit per inverter, for the inverter types listed below.
Direct terminal connection
Wires to the P(+) and DB terminals provided for an external braking resistor on the inverter.
Inverter pairings
| Inverter type | Max braking torque 50 Hz (N·m) | Max braking torque 60 Hz (N·m) | Discharging capability (kWs) | Braking time (s) | Average loss (kW) | Duty cycle (%ED) |
|---|---|---|---|---|---|---|
| FRN0005C2S-4U | 15.0 | 12.4 | 55 | 73 | 0.110 | 14 |
| FRN0007C2S-4U | 22.0 | 18.2 | 55 | 50 | 0.110 | 10 |
Specifications on this page are taken from Fuji Electric FRENIC-Mini Series catalog, 24A1-E-0011e, printed page 19. Verified September 2026.
Technical specifications
| Type | DB2.2-4C |
| Option class | Braking resistor, 10%ED type |
| Resistance | 160 ohm |
| Quantity required | 1 per inverter |
| Maximum braking torque | 150% |
| Applicable inverter types | FRN0005C2S-4U, FRN0007C2S-4U |
| Weight / mass | 0.8 kg |
| External dimensions | 67 x 188 x 55 mm (2.64 x 7.40 x 2.17 inches) W x H x D |
Specifications on this page are taken from Fuji Electric FRENIC-Mini Series catalog, 24A1-E-0011e, printed page 19. Verified September 2026.
Documentation
Frequently asked questions
- Which inverters does the DB2.2-4C work with?
- It is listed for FRN0005C2S-4U, FRN0007C2S-4U.
- What is the resistance of the DB2.2-4C?
- 160 ohm.
- How is the DB2.2-4C connected?
- To the P(+) and DB terminals on the inverter, which are provided for an external braking resistor and driven by the built-in braking transistor.
- What duty cycle does the DB2.2-4C allow?
- It is a 10%ED type. The duty cycle for each inverter pairing is FRN0005C2S-4U at 14%ED; FRN0007C2S-4U at 10%ED.
- Accessory Item:
- Dynamic Braking Resistor
- Accessory Type:
- Dynamic Braking Resistor
- Compatible Series:
- FRENIC-Mini (C2)
