Mounting the NEMA1-C2-106 on the FRENIC-Mini series of inverters brings the inverter enclosure into compliance with the NEMA1 Standard (UL TYPE1 certified). Each kit is cut for a specific frame, so the part number has to match the inverter type.
Best for
- Panels where the drive is mounted in a NEMA 1 enclosure rating
- Replacing a damaged or missing kit on an installed FRENIC-Mini (C2)
Key features
NEMA1, UL TYPE1 certified
Brings the inverter enclosure into compliance with the NEMA1 Standard.
Frame matched
Sized for the listed inverter types only. Not applicable to the EMC filter built-in type or to inverters of 5.5 kW or above.
Fits these inverter types
| Inverter type |
|---|
| FRN0003C2S-6U |
Specifications on this page are taken from Fuji Electric FRENIC-Mini Series catalog, 24A1-E-0011e, printed page 21. Verified September 2026.
Technical specifications
| Option type | NEMA1-C2-106 |
| Option class | NEMA1 kit |
| Compatible series | FRENIC-Mini (C2) |
| Applicable inverter types | FRN0003C2S-6U |
| Standard | NEMA1 Standard, UL TYPE1 certified |
| Inverter ambient temperature with the kit fitted | −10°C (14°F) to +40°C (104°F) |
| Restriction | Not applicable to the EMC filter built-in type or to inverters of 5.5 kW or above |
Specifications on this page are taken from Fuji Electric FRENIC-Mini Series catalog, 24A1-E-0011e, printed page 21. The ambient temperature limit with the kit fitted is taken from Fuji Electric Corp. of America datasheet FECA-DS-101b. Verified September 2026.
Documentation
Frequently asked questions
- Which inverters does the NEMA1-C2-106 fit?
- It fits FRN0003C2S-6U.
- What does the NEMA1-C2-106 change about the inverter rating?
- It brings the inverter enclosure into compliance with the NEMA1 Standard (UL TYPE1 certified). The inverter itself is an IP20 UL open type unit without it.
- Does the NEMA1-C2-106 change the inverter temperature rating?
- Yes. With a NEMA 1 kit fitted the inverter ambient temperature range is −10°C (14°F) to +40°C (104°F) rather than +50°C (122°F).
- Can the NEMA1-C2-106 be used on an EMC filter built-in inverter?
- No. Not applicable to the EMC filter built-in type or to inverters of 5.5 kW or above.
- Accessory Item:
- NEMA 1 Kit
- Accessory Type:
- NEMA 1 Kit
- Compatible Series:
- FRENIC-Mini (C2)
