Option typeRail mounting base
SeriesFRENIC-Mini (C2)
Rail35 mm (1.38 in) DIN
Fits3 inverter types
The Fuji Electric RMA-C1-3.7 is a rail mounting base that lets the listed FRENIC-Mini (C2) inverters mount on a din rail 35 mm (1.38 inches) wide.
A rail mounting base allows the FRENIC-Mini series of inverter to be mounted on a DIN rail 35 mm (1.38 inches) wide. The RMA-C1-3.7 is cut for the frames listed below.
Best for
- Control panels built on DIN rail rather than a mounting plate
- Retrofits where drilling the back panel is not practical
Key features
35 mm DIN rail mounting
Mounts the inverter on a DIN rail 35 mm (1.38 inches) wide.
Frame matched
Sized for the listed inverter types only. Not suitable for inverters of 5.5 kW (7.5 HP) or above.
Fits these inverter types
| Inverter type |
|---|
| FRN0020C2S-2U |
| FRN0011C2S-4U |
| FRN0012C2S-7U |
Specifications on this page are taken from Fuji Electric FRENIC-Mini Series catalog, 24A1-E-0011e, printed page 21. Verified September 2026.
Technical specifications
| Option model | RMA-C1-3.7 |
| Option class | Rail mounting base |
| Compatible series | FRENIC-Mini (C2) |
| Rail | DIN rail 35 mm (1.38 inches) wide |
| Applicable inverter types | FRN0020C2S-2U, FRN0011C2S-4U, FRN0012C2S-7U |
| Restriction | Not suitable for inverters of 5.5 kW (7.5 HP) or above |
Specifications on this page are taken from Fuji Electric FRENIC-Mini Series catalog, 24A1-E-0011e, printed page 21. Verified September 2026.
Documentation
Frequently asked questions
- Which inverters does the RMA-C1-3.7 fit?
- It fits FRN0020C2S-2U, FRN0011C2S-4U, FRN0012C2S-7U.
- What size DIN rail does the RMA-C1-3.7 need?
- A DIN rail 35 mm (1.38 inches) wide.
- Can the RMA-C1-3.7 be used on the larger FRENIC-Mini frames?
- No. Not suitable for inverters of 5.5 kW (7.5 HP) or above.
- Accessory Item:
- Din Rail Kit
- Accessory Type:
- Din Rail Kit
- Compatible Series:
- FRENIC-Mini (C2)
