Skip to main content

Functional Devices RIBMNWLB-7-BC : AHU Fan Safety Alarm and General Purpose Logic Circuit, BACnet MS/TP Network, 24 Vac/dc Power Input, Two Binary Outputs + Override, Seven Binary Inputs, 2.75″ Track Mount

Functional Devices

MSRP: $452.60
$226.30
(You save $226.30 )
(No reviews yet) Write a Review
SKU:
RIBMNWLB-7-BC
Condition:
New
Availability:
Usually Ships in 2-4 Days
Adding to cart… The item has been added

Functional Devices RIBMNWLB-7-BC : AHU Fan Safety Alarm and General Purpose Logic Circuit, BACnet MS/TP Network, 24 Vac/dc Power Input, Two Binary Outputs + Override, Seven Binary Inputs, 2.75″ Track Mount

RIBMNWLB-7-BC is a valuable space saver on your DDC controller by communicating which device is tripped over bacnet. This logic board has an additional input allowing for fan status to be communicated over the bacnet connection.  All the safety devices are still hardwired to the safety shutdown circuit, so even in the event of a loss of communication the logic board will still shut down the air handler during a fall condition.

Specifications

Expected Relay Life: 10 million cycles minimum mechanical
Operating Temperature: -30 to 140° F
Humidity Range: 5 to 95% (noncondensing)
Operate Time: 8ms
Power Input: 24 Vac/dc: 50-60 Hz
Max current input determined by adding load
current user applies to BO 1-1 (3A Max) plus 75 mA @ 24 Vac or 30 mA @ 24 Vdc depending on power source supplied by user to power RIB device, 24 Vac or 24 Vdc
Dimensions: 6.62”H x 2.75”W x 1.25”D1/1.75”D2
Housing Detail: See Housing H in housing guide for dimensions
Origin: Made of US and non-US parts
Approvals: UL864, UL916, C-UL, CE, RoHs, CSFM
Relay Rating, BO 1-1: 3 Amp Max @ 24 Vac or 24 Vdc (depending on power source supplied by user to power RIB device)
Relay Rating, BO 1-2: 10 Amp Resistive @ 30 Vdc
10 Amp General Use @ 277 Vac
1/2 HP @ 120/240 Vac
Relay Rating, BO 2: 20 Amp Resistive @ 277 Vac
5 Amp @ 480 Vac
20 Amp Ballast @ 277 Vac
16 Amp Electronic Ballast @ 277 Vac
1 HP @ 120 Vac
2 HP @ 277 Vac
Relay Override Switch: DIP Switch Control
Network Media: Twisted Pair 22-24AWG, shielded recommended
Terminations: Functional Devices product installed at both ends of the MS/ TP network – Use 120 Ω end of line resistors. All other cases – Follow instructions from the device installed at the end of the MS/TP network.
Polarity: Network is polarity sensitive
Baud Rate: 9600, 19200, 38400, 57600, 76800, 115200 (DIP Switch Selectable)

 

Data Sheets

 

Mounting:
Track Mount
Number of Relays:
2

Videos Hide Videos Show Videos