Functional Devices RIB01SBDC : Dry Contact Relay, 20 Amp SPST-N/O + Override, Class 2 Dry Contact Input, 120 Vac Power Input, NEMA 1 Housing

Functional Devices RIB01SBDC : Dry Contact Relay, 20 Amp SPST-N/O + Override, Class 2 Dry Contact Input, 120 Vac Power Input, NEMA 1 Housing

Product Features

• Prepackaged for quick and easy installation
• Provides low-voltage (Class2) power needed to activate the relay (self-powered) by closing the dry contact input
• Activated by a wide range of dry contacts such as thermostats, switches, other relays, solid-state switches, etc.
• Power to energize the relay can be brought to the relay on a separate pair of wires along with the control output of the controller, or can be a local power source near the relay
• Relay contacts are isolated from the input power and the dry contact input, so they can be wired to switch any other power-load or low-voltage load (see specifications for contact ratings)

SPECIFICATIONS

# Relays & Contact Type: One (1) SPST Continuous Duty Coil
Expected Relay Life: 10 million cycles minimum mechanical
Operating Temperature: -30 to 140° F
Humidity Range: 5 to 95% (noncondensing)
Operate Time: 1.8 Seconds
Relay Status: LED On = Activated
Dimensions: 2.39”H x 3.31”W x 1.81”D with 0.50” NPT nipple
Wires: 16", 600V Rated
Approvals: UL Listed, UL916, C-UL, CE, RoHS
Housing Rating: UL Accepted for Use in Plenum, NEMA 1
Gold Flash: No
Override Switch: Yes

Contact Ratings:
20 Amp Resistive @ 277 Vac
1110 VA Pilot Duty @ 277 Vac
770 VA Pilot Duty @ 120 Vac
20 Amp Ballast @ 277 Vac (N/O)
10 Amp Ballast @ 277 Vac (N/C)
Not rated for Electronic Ballast
10 Amp Tungsten @ 120 Vac (N/O)
240 Watt Tungsten @ 120 Vac (N/C)
2 HP @ 277 Vac
1 HP @ 120 Vac

Power Input:
42 mA @ 120 Vac

Notes:

• Dry Contact Input Operation: Close White/Red wire to White/Blue wire to activate relay. If more than one dry contact RIB® shares a single dry contact input, White/Blue must be common.
• Order Normally Closed by adding “-NC” to end of model number

Data Sheets