Functional Devices RIBTE02SB : Enclosed Low Input/Optoisolated Relay, 20 Amp Contact Rating, Relay Contact Type: SPST + Override, 208-277 Vac Power Input, 5-25 Vac Control Input, Hi/Lo Voltage Separation, NEMA 1 Housing

Functional Devices RIBTE02SB : Enclosed Low Input/Optoisolated Relay, 20 Amp Contact Rating, Relay Contact Type: SPST + Override, 208-277 Vac Power Input, 5-25 Vac Control Input, Hi/Lo Voltage Separation, NEMA 1 Housing

Functional Devices Optoisolated relays help isolate noisy loads from the controller. Good for controlling power relays from analog outputs.

SPECIFICATIONS

Power Input: 208-277 Vac, 50-60 Hz
Control Input: 5-25 Vac/dc, 50-60 Hz
# Relays & Contact Type: One (1) SPST Continuous Duty Coil
Expected Relay Life: 10 million cycles minimum mechanical
Operating Temperature: -30 to 140° F
Humidity Range: 5 to 95% (noncondensing)
Operate Time: 18ms
Relay Status: LED On = Activated
Dimensions: 4.00" x 4.00" x 1.80"with .50" NPT Nipple
Wires: 16", 600V Rated
Approvals: UL Listed, UL916, UL864, C-UL California State Fire Marshal, CE, RoHS
Housing Rating: UL Accepted for Use in Plenum, NEMA 1
Gold Flash: No
Override Switch: Yes

Contact Ratings:

20 Amp Resistive @ 277 Vac
1110 VA Pilot Duty @ 277 Vac
770 VA Pilot Duty @ 120 Vac
20 Amp Ballast @ 277 Vac (N/O)
10 Amp Ballast @ 277 Vac (N/C) 
Not rated for Electronic Ballast\
10 Amp Tungsten @ 120 Vac (N/O)
240 Watt Tungsten @ 120 Vac (N/C)
2 HP @ 277 Vac
1 HP @ 120 Vac

Control Input Ratings:
.4 mA @ 5Vdc
.9 mA @ 10Vdc
1 mA @ 12 Vdc
2 mA @ 24 Vdc
3 mA @ 24 Vac (Non Polarized)

Power Input Ratings: 69 mA @ 208-277 Vac

Notes:

• Normally Open or Normally Closed selected by yellow jumper wire