Specifications per the Prolon Terminal Box PL-AV datasheet, doc 802-00027-008 (V8) and the Prolon Flow Sensor (PL-FSD) datasheet REV 7.1.0 (PL-DATA-FSD-C/F-EN). Reviewed September 26, 2026.
The PL-AV10-FSD installs in the 10 in. round branch duct serving a zone. Its damper, driven through the 1/2 in. drive shaft, modulates the air delivered to the space, and the 1 in. sleeve small end at the inlet and discharge makes the duct connection. The PL-FSD flow sensor measures the dynamic pressure corresponding to air velocity through the box, and its 1/4 in. high and low pressure ports connect by tubing to the airflow sensor of a VAV zone controller.
Best For
- Variable air volume zoning applications using a 10 in. nominal round terminal box, up to 825 CFM.
- Installs that mount a damper actuator on a factory mounted actuator bracket.
- Variable air volume applications using the PL-FSD sensor to measure velocity pressure through the measurement location.
Warranty
Key Features
825 CFM Max Airflow
Rated for a maximum airflow of 825 CFM (389 L/s) at the 10 in. size.
Double Blade Damper
Damper in 22 ga. G90 galvanized steel with a polymer seal.
G90 Galvanized Casing
22 ga. G90 galvanized steel casing, 15 in. long (Dim P).
Actuator Ready
Factory mounted actuator bracket and 1/2 in. black zinc plated drive shaft.
Slip Sleeve Ends
Sleeve small end 1 in. for connection at the inlet and discharge.
PL-FSD Flow Sensor
Four total pressure rods and two static pressure tubes feed a center core with 1/4 in. high and low pressure ports.
ZOT Supply is an authorized distributor of Prolon products.
Technical Specifications
| Specification | Value |
|---|---|
| Model | PL-AV10-FSD |
| Series | Prolon PL-AV terminal box |
| Nominal Size | 10 in. |
| Max Airflow | 825 CFM (389 L/s) |
| Inlet Diameter (Dia D) | 9.875 in. |
| Length (Dim P) | 15 in. (381 mm) |
| Casing | 22 ga. G90 galvanized steel casing |
| Damper | Double blade damper in 22 ga. G90 galvanized steel with polymer seal |
| Drive Shaft | 1/2 in. black zinc plated drive shaft |
| Actuator Mounting | Factory mounted actuator bracket |
| Duct Connection | Sleeve small end 1 in. for connection at inlet and discharge |
| Flow Sensor | Prolon PL-FSD |
| Flow Sensor Duct Diameter | 10 in. (254 mm) |
| Flow Sensor K Factor | 2.24 |
| Flow Sensor Construction | Four rods measure total pressure and two angular tubes measure static pressure, coupled to a center core with two chambers that centralize, amplify and balance the readings |
| Measurement Openings | Location and diameter of the measurement openings on each rod conform to Standard III of ASHRAE |
| Flow Sensor Material | Molded ABS plastic, pre-treated to meet the UL94 standard regarding flame spread in buildings |
| Pressure Ports | 1/4 in. high pressure port and 1/4 in. low pressure port |
| Application | Variable air volume zoning |
Documentation
Frequently Asked Questions
What is the maximum airflow of the Prolon PL-AV10-FSD?
The PL-AV10-FSD is rated for a maximum airflow of 825 CFM (389 L/s).
What are the dimensions of the Prolon PL-AV10-FSD?
The PL-AV10-FSD is the 10 in. size, with an inlet diameter (Dia D) of 9.875 in. and a length (Dim P) of 15 in. (381 mm).
How does an actuator mount on the PL-AV10-FSD?
The PL-AV10-FSD has a factory mounted actuator bracket and a 1/2 in. black zinc plated drive shaft.
What is the K factor of the flow sensor on the PL-AV10-FSD?
The PL-FSD flow sensor for a 10 in. duct diameter has a K factor of 2.24.
Where is the flow sensor K factor entered on a Prolon VAV controller?
In Prolon Focus software, duct setup takes the duct diameter in which the flow sensor is installed and the K factor of the flow sensor. Both are needed before running the Focus auto calibrate procedure.
How do I connect tubing to the PL-FSD on the PL-AV10-FSD?
The PL-FSD has a 1/4 in. high pressure port and a 1/4 in. low pressure port. Run each to the matching high and low airflow inlet on the zone controller.
What is the PL-AV10-FSD made of?
The casing is 22 ga. G90 galvanized steel, and the double blade damper is 22 ga. G90 galvanized steel with a polymer seal.
- Size:
- 10 Inch
- Flow Sensor:
- With Flow Sensor
1 Review Hide Reviews Show Reviews
-
Prolon PL-AV10-FSD
Perfect for my project to replace my damper assembly outside of the vav.
