Skip to main content
Schneider Electric EHD110 : Duct Humidity Sensor, 2% Accuracy, RH Outputs: 4-20 mA, 0-5, or 0-10VDC (Field Selectable)

Schneider Electric EHD110 : Duct Humidity Sensor, 2% Accuracy, RH Outputs: 4-20 mA, 0-5, or 0-10VDC (Field Selectable)

Schneider Electric

MSRP: $370.70
$142.15
(You save $228.55 )
(No reviews yet) Write a Review
SKU:
EHD110
Condition:
New
Availability:
Ships in 2-3 Days
Adding to cart… The item has been added

Schneider Electric EHD110 : Duct Humidity Sensor, 2% Accuracy, RH Outputs: 4-20 mA, 0-5, or 0-10VDC (Field Selectable)

The EH Series Duct humidity sensors are a universal Relative Humidity transmitter that can be powered with either a +15 to 36 Vdc or 24 Vac supply voltage. The EH Series sensors are designed with a field-selectable 4-20 mA, 0-5 VDC, or 0-10 Vdc output signal that is equivalent to 0 to 100% RH.

Features

• Single-point field calibration
• Field selectable output signals • ±2% accuracy
• Low drift
• Highly repeatable
• Integral temperature sensor

Specifications

Supply voltage
  • 250 Ohm Load: +15 to 36 Vdc / 21.6 to 26.4 Vac
  • 0-5VDC: +15 to 36 Vdc / 21.6 to 26.4 Vac
  • 500 Ohm Load: +18 to 36 Vdc / 21.6 to 26.4 Vac
  • 0-10VDC: +18 to 36 Vdc / 21.6 to 26.4 Vac
Power consumption 1VA maximum
RH measurement range 0 to 100%
RH output
  • 2-wire, 4 to 20mA (factory atandard)
  • 3-wire, 0-5, 0-10 Vdc or 4 to 20mA
Accuracy at 77 °F (25 °C) +/- 2% from 20 to 95%
Long-term stability Less than 2% drift / 5 years

 

Data Sheets

pdf logo Schneider Electric SpaceLogic Sensors Humidity Sensors EH Series
Sensor Type:
Duct
Temperature Element:
None
Supported Protocols:
None
Humidity Element:
2%
CO2 Element:
None
Display:
No Display
VOC Element:
None
Output Signal:
4-20mA, 0-5 VDC, or 0-10 VDC
!