Senva C-1200HV : Solid-Core Mini-Fixed Trip Point Current Switch, Contact Type: Normally Open "N/O", Amp Range: 0.25-50A, Trip Point: 0.25A or Less, Contact Rating: 0.2A @ 120VAC, 7-Year Warranty, Made in USA
Fixed threshold trip point detects the presence of current above low trip point to provide cost-effective status monitoring unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern.
Applications
-
Monitoring on/off status of electrical loads
-
Monitoring direct-drive units, exhaust fans, and other fixed loads
-
Verifying lighting run times
Specifications
| Standard Output Rating | 1.0A@30VAC/DC |
| Line Voltage Output Rating | 0.2A@120VAC (-HV MODELS ONLY) |
| Output Type | NO, solid-state FET |
| Temperature Rating | -15-60 ° C |
| Insulation Class | 600V RMS. For use on insulated conductors only! |
| Insulation Class | Use minimum 75 ° C insulated conductor |
| Sensor Power | Induced |
| Frequency Range | 50/60Hz |
Data Sheets
 | Senva Fixed (Go/No) Current Switch Data Sheet |
| Senva C-1200HV Installation Instructions |
| Buy American Act Certification |
- Mounting Type:
- Solid-Core
- Setpoint:
- Fixed Trip
- Contact Type:
- Normally Open
- Amp Range:
- 0.25-50A
- Contact Rating:
- 0.2A @ 120VAC
- Contact Termination:
- Terminal Strip
