Senva C-2300 : Split-Core Fixed Trip Point Current Switch, Contact Type: Normally Open "N/O", Amp Range: 0.35-200A, Trip Point: 0.35A or Less, Contact Rating: 1.0A @ 30VAC/DC, 7-Year Warranty, Made in USA
The Senva C-2300 is a Split-Core Fixed Trip Point Current Switch with a Normally Open contact type and an amp range of 0.35-200A. It has a trip point of 0.35A or less, and its contact rating is 1.0A at 30VAC/DC. The Senva C-2300 is designed for monitoring the on/off status of electrical loads, including direct-drive units, exhaust fans, and other fixed loads where belt loss is not a concern. Made in the USA, the C-2300 is a cost-effective solution for status monitoring with a fixed threshold trip point.
Applications
- Monitoring on/off status of electrical loads
- Monitoring direct-drive units, exhaust fans, and other fixed loads
- Verifying lighting run times
Specifications
| Standard Output Rating | 1.0A@30VAC/DC |
| Line Voltage Output Rating | 0.2A@120VAC (-HV MODELS ONLY) |
| Output Type | NO, solid-state FET |
| Temperature Rating | -15-60 ° C |
| Insulation Class | 600V RMS. For use on insulated conductors only! |
| Insulation Class | Use minimum 75 ° C insulated conductor |
| Sensor Power | Induced |
| Frequency Range | 50/60Hz |
Data Sheets
 |
Senva Fixed (Go/No) Current Switch Data Sheet |
|
Senva C-2300 Installation Instructions |
|
Senva C-2300 Engineering Specification |
|
Buy American Act Certification |
- Mounting Type:
- Split-Core
- Setpoint:
- Fixed Trip
- Contact Type:
- Normally Open
- Amp Range:
- 0.35-200A
- Contact Rating:
- 1.0A @ 30VAC/DC
- Contact Termination:
- Terminal Strip
