The Senva CVT-F08M-C6 is a flexible split-core Rogowski Current/Voltage Transducer with a blue 3 ft lead rated for the 800A operating range (±1% of reading from 30–800A (3.75–100% of rated current)) with a 15” (Medium) rope circumference and 3 ft lead length. The CVT senses both voltage and current, carries all high-voltage connections, and communicates digitally with Senva EM-PULSE and EM-RS485 meters (sold separately) for 1% total system accuracy, plug-and-play auto-recognition, and automatic scaling. Universally rated 90–600V, made in the USA by Senva, Inc. (Buy American Act, BABAA, ARRA, and TAA conformant).
Senva CVT-F08M-C6 Current/Voltage Transducer
The Current/Voltage Transducer (CVT) measures both voltage and current, communicating the data digitally to the EM Series meter via plug-in low-voltage connections — the meter itself stays entirely low-voltage. Each CVT is individually calibrated, and measurement accuracy travels with the transducer, a major advantage for auditing since the meter is not size-specific.
Digital communication provides superior noise immunity compared to traditional induced low-signal Rogowski wiring, and the flexible split-core coil installs around conductors without the saturation effects of iron-core sensors.
Best For
- Energy management and performance contracting
- Tenant submetering and activity-based costing in commercial and industrial facilities
- Real-time power monitoring and load shedding
- Energy audits and temporary monitoring
- Distributed generation and data center energy sensing
Key Features
Digitally Calibrated Accuracy
Individually calibrated for ±1% of reading from 30–800A (3.75–100% of rated current) — accuracy travels with the CVT, so it can move between meters without recalibration. 1% total system accuracy with the EM meter.
All High Voltage at the CVT
The voltage taps and fuse-free connections are contained at the transducer, keeping the EM meter base entirely low-voltage — the safest, fastest install on the market.
Plug-and-Play Recognition
The EM meter digitally recognizes the CVT and scales automatically — no DIP switches, no CT ratios, no manual setup.
Superior Noise Immunity
Digital communication between CVT and meter outperforms traditional induced low-signal Rogowski wiring in electrically noisy environments.
15” Flexible Rogowski Coil
Lightweight medium-size split-core coil wraps conductors without saturation effects common to iron-core sensors — rated 800A, universally rated 90–600V.
No Fusing Under 10 ft
Per UL 240.21 tap-rule guidance, no overcurrent protection is required for CVT voltage reference runs under 10 ft.
Technical Specifications
Specifications verified against the Senva CVT Series datasheet; trade compliance per the 2026 Senva Commerce Declaration.
| Performance | |
| System Accuracy | 1% (meter + CVTs) for V, A, kW, kVAR, kVA |
| 800A Operating Range | ±1% of reading from 30–800A (3.75–100% of rated current) |
| Configuration | |
| Rope Circumference | 15” (Medium) |
| Lead Length | 3 ft |
| Lead Color | Blue |
| Voltage Rating | Universally rated 90–600V |
| Compatible Meters | Senva EM-PULSE and EM-RS485 (sold separately) |
| Operating Environment | |
| Temperature | -4 to 140°F (-20 to 60°C) |
| Humidity | 0–95% non-condensing |
| Enclosure | |
| CVT Enclosure | Polycarbonate/ABS, 3.5”H x 1.6”W x 0.8”D |
| Fusing | |
| Fuse Requirement | Not required per UL 240.21 for CVT runs under 10 ft; runs over 20 ft require overcurrent protection (CVT-FUSE kit) |
| Fuse Type (optional kit) | 1/2 Amp, 600VAC slow blow, 200kA AC interrupting rating |
| Compliance | |
| Trade Compliance | Made in USA – Buy American Act, BABAA, ARRA §1605, and TAA conformant (see declaration) |
Documentation
Senva CVT Current/Voltage Transducers Datasheet- Senva Commerce Declaration - BABAA, TAA, ARRA (2026)
- Motor Engineering Formulas Reference
- Electrical Wire Sizes Selection Guide
Related Senva Metering Products
Protocol meter for this CVT — plug-and-play BACnet MS/TP, Modbus RTU and ASCII.
Pulse-output meter for this CVT — dual kWh import/export pulse outputs.
The 3-phase kit version of this coil — three color-coded CVTs (black, red, blue) in one part number.
Same 800A coil with a 6 ft lead.
Optional 1/2A 600VAC fuse kit for voltage reference runs over 20 ft.
Frequently Asked Questions
Which meters does the CVT-F08M-C6 work with?
Senva EM-PULSE and EM-RS485 (including the RPM version) meters only, sold separately. The CVT communicates digitally and is automatically recognized and scaled by the EM meter. It is not compatible with the Senva EMX, which uses standard 0.333V CTs and analog Rogowski coils instead.
What is included with the CVT-F08M-C6?
One blue-lead CVT rated for the 800A operating range with a 3 ft lead. For a full 3-phase installation, order three CVTs or the color-coded 3PH kit.
Does the CVT require fusing?
Not for typical installs. Per UL 240.21 tap-rule guidance, CVT voltage reference runs under 10 ft require no overcurrent protection, and Senva ships no more than 10 ft of voltage reference wire per CVT. Runs over 20 ft require appropriate overcurrent protection, such as the CVT-FUSE kit.
Can I mix this CVT with other sizes on one meter?
Yes. Each EM meter channel independently recognizes its CVT and auto-scales, so different amperage ranges can be mixed per phase on a single meter.
Is the CVT-F08M-C6 Buy American Act compliant?
Yes. Senva CVT transducers are manufactured in the USA by Senva in Beaverton, Oregon, and conform to the Buy American Act, BABAA, ARRA Section 1605, and the TAA. The signed 2026 conformance declaration is in the documentation section above.
- Product Line:
- CVT Series
- Product Type:
- Current Voltage Transducer
- Operating Range:
- 800A
- Rope Circumference:
- 15 in
- Lead Length:
- 3 ft
- Lead Color:
- Blue
- Compatible Meter:
- EM-RS485
- Compatible Meter:
- EM-PULSE
- Country of Origin:
- USA
