Senva HT0R-2BD : Room Humidity/Temperature Combo Sensor, 2% rH Accuracy, 0-10VDC Output (3-Wire), 1K Platinum RTD, Buy American Act Compliant, 7-Year Limited Warranty
Specifications:
| Power Supply | 12-30VDC/24VAC (1), 24mA max. |
| RH% Outputs | 3-wire 0-10VDC |
| Output scaling | 0-100% RH |
| Thermistor Options | 1K Platinum RTD |
| Media filter | PTFE membrane, IP54 protection |
| Relative Humidity | |
| Accuracy | 2% models: ±2% max 0 to 100% RH, ±1.5% typ 0 to 80% RH@25°C |
| Resolution | 0.01%RH |
| Hysteresis | ±0.8%RH |
| Non-Linearity | factory linearized <1%RH |
| Temperature coefficient | fully compensated by on-board temp sensor |
| Response time (2) | 8s |
| Output update rate | 0.5s |
| Operating range | 0 to 100%RH (non-condensing) |
| Long term drift | <0.25%RH per year |
| Normal Operating conditions (3) | 41 to 140°F (5 to 60°C) @ 20 to 80%RH |
Datasheets
 | Senva HT0R Humidity/Temperature Recessed Data Sheet |
| Senva HT0R Humidity/Temperature Recessed Installation Sheet |
| Senva Made In USA Certificate 2023 |
- Sensor Type:
- Wall Mount
- Temperature Element:
- 1K Platinum RTD
- Supported Protocols:
- None
- Humidity Element:
- 2%
- CO2 Element:
- None
- Setpoint:
- No Setpoint
- Override:
- No Override
- Display:
- No Display
- Material:
- Plastic
